Don't use ivtv-0.7. Use 0.6. I recommend trying the development snapshot
as it fixes a problem some people have with channel changing.
ivtv-0.7.0 is for the upcoming 2.6.17 kernel and should not be used
until it is officially released.
Hans
On Saturday 10 June 2006 16:24, Paul Zirnik wrote:
> Hi List,
>
> i just upgraded my 10.0 to 10.1 and can't get my PVR-250 to work
> correctly. (driver 0.7.0 from oss version of 10.1)
> All input works, expect the television. When i tune to a valid
> frequency i only get a inputsignal that looks like the antenna is
> unpluged. When i reboot the system to 10.0 everything works perfectly
> (old driver version 0.3.7). So it's not a wiring/antenna problem.
>
> The init of the card looks perfect to me
> (i put sa7115 and tveeprom already to debug)
>
> ---------------------------
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.7.0 (development snapshot compiled on Wed May 3
> 13:12:51 2006) loading
> ivtv: Linux version: 2.6.16.13-4-default 586 REGPARM gcc-4.1
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 217
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
> msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is
> autodetect and autoselect
> saa7115 1-0021: detecting saa7115 client on address 0x42
> saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> saa7115 1-0021: writing init values
> saa7115 1-0021: set audio clock freq: 48000
> saa7115 1-0021: status: (1E) 0x48, (1F) 0xc0
> tveeprom 1-0050: full 256-byte eeprom dump:
> tveeprom 1-0050: 00: 84 09 00 04 20 77 00 40 47 7a 6d 00 73 05 99 00
> tveeprom 1-0050: 10: 84 08 00 06 36 7d 00 00 18 15 89 72 07 70 73 09
> tveeprom 1-0050: 20: 13 5f 73 0a 04 30 74 0b 98 18 0c 72 0f 01 72 10
> tveeprom 1-0050: 30: 01 72 11 00 79 9a 00 00 00 00 00 00 00 00 00 00
> tveeprom 1-0050: 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> tveeprom 1-0050: 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> tveeprom 1-0050: 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> tveeprom 1-0050: 70: 00 00 00 00 00 00 00 00 00 00 00 00 13 eb 00 70
> tveeprom 1-0050: 80: 84 09 00 04 20 77 00 40 47 7a 6d 00 73 05 99 00
> tveeprom 1-0050: 90: 84 08 00 06 36 7d 00 00 18 15 89 72 07 70 73 09
> tveeprom 1-0050: a0: 13 5f 73 0a 04 30 74 0b 98 18 0c 72 0f 01 72 10
> tveeprom 1-0050: b0: 01 72 11 00 79 9a 00 00 00 00 00 00 00 00 00 00
> tveeprom 1-0050: c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> tveeprom 1-0050: d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> tveeprom 1-0050: e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> tveeprom 1-0050: f0: 00 00 00 00 00 00 00 00 00 00 00 00 13 eb 00 70
> tveeprom 1-0050: Tag [04] + 8 bytes: 20 77 00 40 47 7a 6d 00
> tveeprom 1-0050: Tag [05] + 2 bytes: 99 00
> tveeprom 1-0050: Tag [06] + 7 bytes: 36 7d 00 00 18 15 89
> tveeprom 1-0050: Tag [07] + 1 bytes: 70
> tveeprom 1-0050: Tag [09] + 2 bytes: 13 5f
> tveeprom 1-0050: Tag [0a] + 2 bytes: 04 30
> tveeprom 1-0050: Tag [0b] + 3 bytes: 98 18 0c
> tveeprom 1-0050: Tag [0f] + 1 bytes: 01
> tveeprom 1-0050: Tag [10] + 1 bytes: 01
> tveeprom 1-0050: Not sure what to do with tag [10]
> tveeprom 1-0050: Tag [11] + 1 bytes: 00
> tveeprom 1-0050: Not sure what to do with tag [11]
> tveeprom 1-0050: Hauppauge model 32054, rev B148, serial# 7174727
> tveeprom 1-0050: tuner model is LG TP18PSB11D (idx 48, type 29)
> tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
> tveeprom 1-0050: audio processor is MSP4418 (idx 25)
> tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
> tveeprom 1-0050: has no radio, has IR remote
> ivtv0: Corrected autodetection from Hauppauge WinTV PVR-150 to
> Hauppauge WinTV PVR-250
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total)
> tuner 1-0061: type set to 29 (LG PAL_BG (TPI8PSB11D))
> saa7115 1-0021: disable output
> saa7115 1-0021: decoder set input 4
> saa7115 1-0021: now setting Composite input
> saa7115 1-0021: enable output
> saa7115 1-0021: decoder set standard 50 Hz
> saa7115 1-0021: set audio clock freq: 48000
> saa7115 1-0021: disable output
> saa7115 1-0021: enable output
> ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
> ivtv: ==================== END INIT IVTV ====================
> saa7115 1-0021: disable output
> saa7115 1-0021: enable output
> saa7115 1-0021: disable output
> saa7115 1-0021: enable output
> saa7115 1-0021: status: 0xc0
> saa7115 1-0021: disable output
> saa7115 1-0021: decoder set input 1
> saa7115 1-0021: now setting Composite input
> saa7115 1-0021: enable output
> saa7115 1-0021: disable output
> saa7115 1-0021: decoder set input 4
> saa7115 1-0021: now setting Composite input
> saa7115 1-0021: enable output
> saa7115 1-0021: disable output
> saa7115 1-0021: enable output
> -----------------------------
>
> Has someone run into the same problem and know how to fix it ?
> Maybe driver up/downgrade ?
>
> Thanks for any help,
> Paul
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
