On 23/06/06, Jason B Williams <[EMAIL PROTECTED]> wrote: > Card: PVR-150 > Kernel: 2.6.16-r9 > ivtv version: 0.6.2 > > Everything compiled alright; however, when I try to load the ivtv kernel > module I get the following error (from dmesg): > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.6.2 (tagged release) loading > ivtv: Linux version: 2.6.16-gentoo-r9 SMP PENTIUMIII gcc-3.4 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 25 > allocation failed: out of vmalloc space - use vmalloc=<size> to increase > size. > ivtv0: ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h > ivtv0: or disabling CONFIG_HIMEM4G into the kernel would help
Unless you have more then 4Gigs of memory CONFIG_HIMEM4G should be disabled. Have you tried disabling this? > ivtv0: Error -12 on initialization > ivtv: probe of 0000:00:06.0 failed with error -12 > ivtv: ==================== END INIT IVTV ==================== > > I had the exact same problem when I tried this with a 2.6.15-r8 kernel and > 0.4.2 ivtv. I use gentoo, and I see no one else in their forum has posted > this before and the only repeats of it from google are about 3 years old > (with fixes only applying to older kernels). I also don't see any menton of > this on the ivtv wiki. Does anyone have a clue as to what could be wrong > here? _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
