My previous message bounced for size, so heres the abbreviated version

Still problems.

The previous issue has vanished.  The drivers compile and modprobe cleanly...well..almost cleanly.

Now, I get my ivtv modprobed and whatnot, and go on to try cat /dev/video0 and grab an mpg file to make sure all is well.  I run:
cat /dev/video0 > test.mpg

This spits out zero byte files. Files of nothingness, mplayer no like. Mythtv doesn't seem to want to cooperate with the card either.


ivtvctl says i'm using the appropriate tuner... I'm attaching my dmesg, lspci -vvv and ivtvctl -a at the end. I'm slighty desperate to get this working soon, I'm lost without my mythtv.


Thanks guys,


Mike


Dmesg Follows:
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.7.0 (development snapshot compiled on Tue 27 Jun 2006 02:25:36 AM EDT) loading
ivtv:  Linux version: 2.6.17.1MythTV mod_unload K7 REGPARM gcc-3.4
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 20
tveeprom 0-0050: The eeprom says no radio is present, but the tuner type
tveeprom 0-0050: indicates otherwise. I will assume that radio is present.
tveeprom 0-0050: Hauppauge model 26552, rev C268, serial# 8292621
tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)

tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has radio, has no IR remote
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: Failed to load module cx25840
ivtv0: Failed to load module wm8775
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
tuner 0-0061: type set to 47 (LG NTSC (TAPE series))
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c addr 0x44 not found for command 0x4008646f!
ivtv0: i2c hardware 0x00000020 not found for command 0x4008646d!
ivtv0: i2c hardware 0x00000001 not found for command 0x4008646d!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv:  ====================  END INIT IVTV  ====================


ivtvctl -a Follows:


ioctl IVTV_IOC_G_CODEC ok
Codec parameters
aspect      : 2
audio       : 0x00e9
bframes     : 3
bitrate_mode: 0
bitrate     : 8000000
bitrate_peak: 9600000
dnr_mode    : 0
dnr_spatial : 0
dnr_temporal: 8
dnr_type    : 0
framerate   : 0
framespergop: 15
gop_closure : 1
pulldown    : 0
stream_type : 14
ioctl VIDIOC_G_FMT ok
        Type   : Video Capture
        Width  : 720
        Height : 480
ioctl VIDIOC_QUERYCAP ok
        Driver name   : ivtv
        Card type     : Hauppauge WinTV PVR-150
        Bus info      : 0000:01:08.0
        Driver version: 1792
        Capabilities  : 0x01070051
ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : Tuner 1
        Type    : 0x00000001
        Audioset: 0x00000007
        Tuner   : 0x00000000
        Standard: 0x000000000000B000 ( NTSC )
        Status  : 0

        Input   : 1
        Name    : S-Video 1
        Type    : 0x00000002
        Audioset: 0x00000007
        Tuner   : 0x00000000
        Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 2
        Name    : Composite 1
        Type    : 0x00000002
        Audioset: 0x00000007
        Tuner   : 0x00000000
        Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 3
        Name    : S-Video 2
        Type    : 0x00000002
        Audioset: 0x00000007
        Tuner   : 0x00000000
        Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 4
        Name    : Composite 2
        Type    : 0x00000002
        Audioset: 0x00000007
        Tuner   : 0x00000000
        Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
        Status  : 0
ioctl VIDIOC_G_INPUT ok
Video input = 0
ioctl: VIDIOC_ENUMOUTPUT
ioctl VIDIOC_G_OUTPUT failed: Invalid argument
ioctl: VIDIOC_ENUMAUDIO
        Input   : 0
        Name    : Tuner 1

        Input   : 1
        Name    : Line In 1

        Input   : 2
        Name    : Line In 2
ioctl VIDIOC_G_AUDIO ok
Audio input = 0: Tuner 1
ioctl VIDIOC_G_FREQUENCY ok
Frequency = 1076
ioctl: VIDIOC_ENUMSTD
        index       : 0
        ID          : 0x000000000000000F
        Name        : PAL-BGH
        Frame period: 1/25
        Frame lines : 625

        index       : 1
        ID          : 0x00000000000000E0
        Name        : PAL-DK
        Frame period: 1/25
        Frame lines : 625

        index       : 2
        ID          : 0x0000000000000010
        Name        : PAL-I
        Frame period: 1/25
        Frame lines : 625

        index       : 3
        ID          : 0x0000000000000100
        Name        : PAL-M
        Frame period: 1001/30000
        Frame lines : 525

        index       : 4
        ID          : 0x0000000000000200
        Name        : PAL-N
        Frame period: 1/25
        Frame lines : 625

        index       : 5
        ID          : 0x0000000000000400
        Name        : PAL-Nc
        Frame period: 1/25
        Frame lines : 625

        index       : 6
        ID          : 0x00000000000D0000
        Name        : SECAM-BGH
        Frame period: 1/25
        Frame lines : 625

        index       : 7
        ID          : 0x0000000000320000
        Name        : SECAM-DK
        Frame period: 1/25
        Frame lines : 625

        index       : 8
        ID          : 0x0000000000400000
        Name        : SECAM-L
        Frame period: 1/25
        Frame lines : 625

        index       : 9
        ID          : 0x0000000000800000
        Name        : SECAM-L'
        Frame period: 1/25
        Frame lines : 625

        index       : 10
        ID          : 0x0000000000001000
        Name        : NTSC-M
        Frame period: 1001/30000
        Frame lines : 525

        index       : 11
        ID          : 0x0000000000002000
        Name        : NTSC-J
        Frame period: 1001/30000
        Frame lines : 525

        index       : 12
        ID          : 0x0000000000008000
        Name        : NTSC-K
        Frame period: 1001/30000
        Frame lines : 525
ioctl VIDIOC_G_STD ok
Video standard = 0x0000b000
ioctl: VIDIOC_QUERYCTRL
VIDIOC_QUERYCTRL: No such device

lspci -vvv output:

01:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device 8801
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 01)
        Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, cache line size 08
        Interrupt: pin A routed to IRQ 20
        Region 0: I/O ports at a000 [size=8]
        Region 1: I/O ports at a400 [size=4]
        Region 2: I/O ports at a800 [size=8]
        Region 3: I/O ports at ac00 [size=4]
        Region 4: I/O ports at b000 [size=16]
        Region 5: Memory at e9000000 (32-bit, non-prefetchable) [size=512]
        Expansion ROM at e8000000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] (rev 40)
        Subsystem: ASUSTeK Computer Inc. A7N8X Deluxe onboard 3C920B-EMB Integrated Fast Ethernet Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2500ns min, 2500ns max), cache line size 08
        Interrupt: pin A routed to IRQ 17
        Region 0: I/O ports at c000 [size=128]
        Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at 30000000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
        Subsystem: ASUSTeK Computer Inc.: Unknown device 8180
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at e7000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [44] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to