I am getting similar errors, i have no clue what these modules are though: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (tagged release) loading ivtv: Linux version: 2.6.17-rc6 SMP preempt mod_unload PENTIUM4 gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 21 (level, low) -> IRQ 20 tveeprom 0-0050: Hauppauge model 26032, rev C199, serial# 8181946 tveeprom 0-0050: tuner model is TCL 2002N 5H (idx 99, type 50) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is CX25841 (idx 35) tveeprom 0-0050: decoder processor is CX25841 (idx 28) tveeprom 0-0050: has no radio, has IR remote tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: Failed to load module cx25840 ivtv0: Failed to load module wm8775 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 0-0061: type set to 50 (TCL 2002N) ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c addr 0x44 not found for command 0x4008646f! ivtv0: i2c hardware 0x00000020 not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ====================
Nick Rosier wrote: > Scott, > > these modules have been merged into the kernel; you need to select them there. > > N. > > On 7/12/06, scott miller <[EMAIL PROTECTED]> wrote: >> Technically I've been having this exact same problem since upgrading from a >> 2.6.12 kernel (for other hardware) and leaving ivtv 0.4.0. Any help would >> be appreciated, I've pretty much exhausted all other avenues of support I >> could find. >> >> Anyway, here's the results of a modprobe from dmesg: >> >> ivtv: ==================== START INIT IVTV ==================== >> ivtv: version 0.7.0 (tagged release) loading >> ivtv: Linux version: 2.6.17-gentoo-r2 SMP mod_unload gcc-3.4 >> ivtv: In case of problems please include the debug info between >> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >> ivtv: any module options, when mailing the ivtv-users mailinglist. >> ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23415 based) >> ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 >> GSI 21 sharing vector 0x42 and IRQ 21 >> ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) >> -> IRQ 66 >> ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >> ivtv0: Failed to load module tveeprom >> tveeprom 0-0050: Hauppauge model 48011, rev G510, serial# 2670671 >> tveeprom 0-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) >> tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) >> tveeprom 0-0050: audio processor is MSP3435 (idx 10) >> tveeprom 0-0050: decoder processor is SAA7115 (idx 19) >> tveeprom 0-0050: has no radio, has IR remote >> ivtv0: Failed to load module tuner >> ivtv0: Failed to load module tda9887 >> ivtv0: Failed to load module saa7115 >> ivtv0: Failed to load module msp3400 >> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >> ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) >> ivtv0: Encoder revision: 0x02050032 >> ivtv0: Decoder revision: 0x02020023 >> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) >> ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) >> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) >> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB >> total) >> ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! >> ivtv0: i2c addr 0x21 not found for command 0x4008646f! >> ivtv0: i2c hardware 0x00000008 not found for command 0x4008646d! >> ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! >> ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! >> ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! >> ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 >> ivtv: ==================== END INIT IVTV ==================== >> >> It all seems to stemp from the ivtv0: Failed to load module tveeprom line. >> For whatever reason tveeprom appears to load and actually does something >> after that line regardless of this message. Here's my lsmod: >> >> Module Size Used by >> snd_seq_oss 33408 0 >> snd_seq_device 10252 1 snd_seq_oss >> snd_seq_midi_event 10880 1 snd_seq_oss >> snd_seq 51936 4 snd_seq_oss,snd_seq_midi_event >> ivtv 178768 0 >> i2c_algo_bit 12296 1 ivtv >> v4l1_compat 15108 1 ivtv >> tveeprom 19344 1 ivtv >> videodev 12928 1 ivtv >> i2c_dev 13320 0 >> snd_pcm_oss 40992 0 >> snd_mixer_oss 18816 1 snd_pcm_oss >> snd_intel8x0 34984 0 >> snd_ac97_codec 101464 1 snd_intel8x0 >> snd_ac97_bus 6656 1 snd_ac97_codec >> snd_pcm 82440 3 >> snd_pcm_oss,snd_intel8x0,snd_ac97_codec >> snd_timer 23560 2 snd_seq,snd_pcm >> snd 52552 9 >> snd_seq_oss,snd_seq_device,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer >> snd_page_alloc 11792 2 snd_intel8x0,snd_pcm >> nvidia 5428276 0 >> >> As you can see tveeprom does actually load and is used by ivtv. However >> the other 4 modules that ivtv is supposed to load don't. tuner, tda9887, >> saa7115, and msp3400. >> >> Thanks in advance! >> >> Scott >> >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> >> > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
