Looks like you do not have all the modules in the right place

ivtv0: Failed to load module tuner
ivtv0: Failed to load module tda9887
ivtv0: Failed to load module saa7115
ivtv0: Failed to load module msp3400

Try to find them for your running kernel: find /lib/modules/ -name tuner.ko

If they do not exist recompile your kernel and include them as modules.

Regards,

Michel.

scott miller schreef:
Technically I've been having this exact same problem since upgrading from a 2.6.12 kernel (for other hardware) and leaving ivtv 0.4.0.  Any help would be appreciated, I've pretty much exhausted all other avenues of support I could  find.

Anyway, here's the results of a modprobe from dmesg:

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.7.0 (tagged release) loading
ivtv:  Linux version: 2.6.17-gentoo-r2 SMP mod_unload gcc-3.4
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23415 based)
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
GSI 21 sharing vector 0x42 and IRQ 21
ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ                  66
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: Failed to load module tveeprom
tveeprom 0-0050: Hauppauge model 48011, rev G510, serial# 2670671
tveeprom 0-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is MSP3435 (idx 10)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has no radio, has IR remote
ivtv0: Failed to load module tuner
ivtv0: Failed to load module tda9887
ivtv0: Failed to load module saa7115
ivtv0: Failed to load module msp3400
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!
ivtv0: i2c addr 0x21 not found for command 0x4008646f!
ivtv0: i2c hardware 0x00000008 not found for command 0x4008646d!
ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!
ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
ivtv:  ====================  END INIT IVTV  ====================

It all seems to stemp from the ivtv0: Failed to load module tveeprom line.  For whatever reason tveeprom appears to load and actually does something after that line regardless of this message.  Here's my lsmod:

Module                  Size  Used by
snd_seq_oss            33408  0
snd_seq_device         10252  1 snd_seq_oss
snd_seq_midi_event     10880  1 snd_seq_oss
snd_seq                51936  4 snd_seq_oss,snd_seq_midi_event
ivtv                  178768  0
i2c_algo_bit           12296  1 ivtv
v4l1_compat            15108  1 ivtv
tveeprom               19344  1 ivtv
videodev               12928  1 ivtv
i2c_dev                13320  0
snd_pcm_oss            40992  0
snd_mixer_oss          18816  1 snd_pcm_oss
snd_intel8x0           34984  0
snd_ac97_codec        101464  1 snd_intel8x0
snd_ac97_bus            6656  1 snd_ac97_codec
snd_pcm                82440  3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer              23560  2 snd_seq,snd_pcm
snd                    52552  9 snd_seq_oss,snd_seq_device,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc         11792  2 snd_intel8x0,snd_pcm
nvidia               5428276  0

As you can see tveeprom does actually load and is used by ivtv.  However the other 4 modules that ivtv is supposed to load don't.  tuner, tda9887, saa7115, and msp3400.

Thanks in advance!

Scott

_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users



_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to