> ur module has an issue...
> ivtv: no version for "struct_module" found: kernel tainted.
>
> did you recompile your mod after you made SMP kernel ?
I did not recompile the module for the SMP kernel. I pulled the precompiled version using yum.
Am I supposed to do something fancy for SMP kernel?
Thanks,
Raghu.
Preet Khalsa wrote:
> On Thu, 2006-13-07 at 08:01 +0200, Hans Verkuil wrote:
>> On Thursday 13 July 2006 01:00, Raghuram Rajah wrote:
>>> I am not getting any video or audio. All I get is noise on video and
>>> no audio at all. The cards are initialized without any errors (see
>>> dmesg below). I am using a Hauppagge PVR-500MCE with 2.6.17-1.2145
>>> FC5 SMP kernel and 0.7 ivtv. I had this card working on a older
>>> kernel using ivtv 0.4 for about an year. I upgraded to FC5 from FC4
>>> with corresponding ivtv upgrade to 0.7 and it stopped working. I then
>>> tried a fresh install of FC5 with a fresh install of ivtv. Still no
>>> luck.
>> This sounds like a tuner problem. Are you aware that the input names
>> changed? If you are using MythTV you probably have to change Tuner 0 to
>> Tuner 1.
>>
>> Hans
>
> I was aware of the renaming. This seems to happen a lot so when
> changing driver versions, I always delete all cards and add them back.
> Then I reboot with 2 minutes of off time in between.
>
> The bottom line is: SMP kernel not work, UP kernel no problem.
>
>>> I had posted an earlier message, but did not get many suggestions. In
>>> reading the other mails, I noticed that others on the list have this
>>> running on the same version non-SMP kernel. I have a dual core
>>> processor with an SMP kernel and hence was wondering if there is
>>> something specific to an SMP kernel.
>>>
>>> Thanks for your help or any pointers.
>>>
>>> Thanks,
>>> Raghu.
>>>
>>>> ivtv: no version for "struct_module" found: kernel tainted.
>>>> ivtv: ==================== START INIT IVTV ====================
>>>> ivtv: version 0.7.0 (tagged release) loading
>>>> ivtv: Linux version: 2.6.17-1.2145_FC5smp SMP mod_unload 686
>>>> REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include
>>>> the debug info between ivtv: the START INIT IVTV and END INIT IVTV
>>>> lines, along with ivtv: any module options, when mailing the
>>>> ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150
>>>> card (cx23416 based) ivtv0: This is the first unit of a PVR500
>>>> tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
>>>> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>>>> tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
>>>> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>>>> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
>>>> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
>>>> ivtv0: Encoder revision: 0x02050032
>>>> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers
>>>> (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800
>>>> buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120
>>>> x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM
>>>> audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create
>>>> encoder radio stream
>>>> ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
>>>> ivtv: ====================== NEXT CARD ======================
>>>> ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
>>>> tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
>>>> tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
>>>> cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
>>>> wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
>>>> ivtv1: This is the second unit of a PVR500
>>>> ivtv1: Correcting tveeprom data: no radio present on second unit
>>>> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
>>>> ivtv1: Encoder revision: 0x02050032
>>>> ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers
>>>> (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800
>>>> buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120
>>>> x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM
>>>> audio stream: 455 x 4608 buffers (2048KB total) ivtv1: Initialized
>>>> WinTV PVR 500 (unit #2), card #1
>>>> ivtv: ==================== END INIT IVTV ====================
>>> ----------------------------------------
>>>
>>>> Date: Wed, 12 Jul 2006 18:00:21 -0400
>>>> From: [EMAIL PROTECTED]
>>>> To: [email protected]
>>>> Subject: Re: [ivtv-users] ivtv 0.7 on SMP kernel
>>>>
>>>> Yes, specify your problem
>>>>
>>>> Raghuram Rajah wrote:
>>>>> Has anyone got ivtv working on an SMP kernel? I had this working
>>>>> on 0.4 version but am having trouble getting anything from ivtv
>>>>> 0.7.
>>>>>
>>>>> Raghu.
>>>>> _________________________________________________________________
>>>>> Express yourself: design your homepage the way you want it with
>>>>> Live.com. http://www.live.com/getstarted
>>>>>
>>>>>
>>>>> -----------------------------------------------------------------
>>>>> -------
>>>>>
>>>>> _______________________________________________
>>>>> ivtv-users mailing list
>>>>> [email protected]
>>>>> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>>>> _______________________________________________
>>>> ivtv-users mailing list
>>>> [email protected]
>>>> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>>> _________________________________________________________________
>>> Try Live.com: where your online world comes together - with news,
>>> sports, weather, and much more. http://www.live.com/getstarted
>>> _______________________________________________
>>> ivtv-users mailing list
>>> [email protected]
>>> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>> _______________________________________________
>> ivtv-users mailing list
>> [email protected]
>> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
ur module has an issue...
ivtv: no version for "struct_module" found: kernel tainted.
did you recompile your mod after you made SMP kernel ?
Be one of the first to try Windows Live Mail beta
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
