On Thursday 03 August 2006 08:30, Roland Kaeser wrote:
> Hello
>
> You have absolutly right. Its a brand new PVR-350. And I'm using
> Kernel 2.6.16-13. But in my distro, the msp3400 module was shipped
> with the distro kernel and was not compiled with the ivtv-drivers.
> Have I made something wrong?
Please provide the INIT IVTV messages from the kernel log (dmesg).
Mito's problem is related to his specific msp3400 chip (the msp3435g).
If you have a brand new pvr350 then it is unlikely that your problem is
related since you almost certainly have another msp model.
Hans
>
> regards
>
> Roland
>
> ----- Ursprüngliche Mail ----
> Von: Mito Tranin - Lists <[EMAIL PROTECTED]>
> An: Roland Kaeser <[EMAIL PROTECTED]>; User discussion about IVTV
> <[email protected]> CC: Hans Verkuil <[EMAIL PROTECTED]>
> Gesendet: Donnerstag, den 3. August 2006, 04:19:53 Uhr
> Betreff: Re: [ivtv-users] Sound disapears after a few seconds
>
> Roland Kaeser wrote:
> > Hello
> >
> > I have a strange problem with the sound of the card. When I
> > initially configure the card with ivtvctl the sound remains like
> > muted altough mute is set to 0. When I then later switch the
> > audio inputs from 1 to 3 and back the sound comes for about 3
> > seconds and then goes back to muted. But the muted values remains
> > to 0. Can somebody give me a hint what could happend .
>
> I'm having this exact same problem, and Hans is helping me through
> it. It apears as though my version of the PVR-350 is incompatible
> with the current msp3400 module, and he is working through it to fix
> it up. Do you possibly have a PVR-350? or possibly a very old
> PVR-250? If so, you might be suffering from the same problem. If
> so, let Hans know, as he would probably love another test subject for
> this problem.
>
> Mito
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
