Hi, My PVR 350 model 38 (driver cd version 2.3b) freezes after 2 to three hours of television watching. This on different versions (4.5, 4.6 and knoppmyth version) and different kernels, using the firmware from the cd, from the wiki and the one found one the latest knoppmyth. the knoppmyth logs report that the firmware freezes. This on both knoppmyth and ubuntu dapper. I first thought that this was a heating problem but we had some hot days the paste week which didn't affect the time between the freezes.
Is there anybody who has working solution for problem ? Thanks, Philip [17179588.072000] ivtv: ==================== START INIT IVTV ================== == [17179588.072000] ivtv: version 0.4.6 (tagged release) loading [17179588.072000] ivtv: Linux version: 2.6.15-25-686 SMP preempt 686 gcc-4.0 [17179588.072000] ivtv: In case of problems please include the debug info betwe en [17179588.072000] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [17179588.072000] ivtv: any module options, when mailing the ivtv-users mailing list. [17179588.108000] nvidia: module license 'NVIDIA' taints kernel. [17179588.132000] hub 4-0:1.0: over-current change on port 2 [17179588.328000] Floppy drive(s): fd0 is 1.44M [17179588.336000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 [17179588.352000] FDC 0 is a post-1991 82077 [17179588.352000] 8139too Fast Ethernet driver 0.9.27 [17179588.376000] intel8x0_measure_ac97_clock: measured 58433 usecs [17179588.376000] intel8x0: clocking to 48000 [17179588.380000] ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) [17179588.380000] ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 18 (level, low) -> IRQ 209 [17179588.380000] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [17179588.384000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 217 [17179588.392000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 [17179588.392000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61 ] [17179588.560000] msp3400 0-0040: chip=MSP4418G-B3 +nicam +simple +simpler +radi o mode=simpler [17179588.560000] msp3400 0-0040: msp34xxg daemon started [17179588.580000] ivtv0: i2c attach to card #0 ok [client=MSP4418G-B3, addr=40] [17179588.592000] saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) [17179588.732000] ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] [17179588.788000] tveeprom: ivtv version [17179588.788000] tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 8603 780 [17179588.788000] tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) [17179588.788000] tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (ee prom = 0x74, v4l2 = 0x00400e17) [17179588.788000] tveeprom: audio processor = MSP4418 (type = 19) [17179588.788000] tveeprom: decoder processor = SAA7115 (type = 13) [17179588.788000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] [17179588.848000] saa7127 0-0044: ivtv driver [17179588.848000] saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) [17179588.852000] ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] [17179588.880000] tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) [17179588.880000] ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] [17179589.024000] ts: Compaq touchscreen protocol output [17179589.576000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [17179589.608000] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) [17179589.832000] ivtv0: Encoder revision: 0x02050032 [17179589.840000] ivtv0: Decoder revision: 0x02020023 [17179589.840000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers ( 4096KB total) [17179589.840000] ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2 048KB total) [17179589.840000] ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (20 48KB total) [17179589.844000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) [17179589.844000] ivtv0: Create encoder radio stream [17179589.844000] ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1 024KB total) [17179589.844000] ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (10 24KB total) [17179589.844000] ivtv0: Create decoder VOUT stream [17179589.844000] ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (10 24KB total) [17179589.900000] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) [17179590.008000] tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 [17179590.180000] ivtv0: Initialized WinTV PVR 350, card #0 [17179590.180000] ivtv: ==================== END INIT IVTV ===== alias char-major-81 videodev alias char-major-61 lirc_i2c options msp3400 once=1 install ivtv /sbin/modprobe tuner; /sbin/modprobe msp3400; /sbin/modprobe saa7115; /sbin/modprobe --ignore-install ivtv remove ivtv /sbin/modprobe -r --ignore-remove ivtv && /sbin/modprobe -r saa7115 && /sbin/modprobe -r msp3400 && /sbin/modprobe -r tuner============= alias char-major-81-0 ivtv _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
