On 8/29/06, Ramanraj Vamsi <[EMAIL PROTECTED]> wrote:
Without an input of some sort in the Video Sources section you will not be able to tie capture card to a Video Source in the Input Connections portion of the setup. (This is normally where the Zap2it sources are defined for the grabber).
Hi Tim,
I hadn't have any thing like /etc/modules/ivtv.???
So, how to attach my card to inputs?
I am living in INDIA and I haven't have any grabber for my Myth Tv?!
when I run mythbackend I got the following log....
linux:~ # mythbackend
2006-08-29 20:17:41.126 Using runtime prefix = /usr
2006-08-29 20:17:41.138 New DB connection, total: 1
2006-08-29 20:17:41.143 Connected to database 'mythconverg' at host: localhost
2006-08-29 20:17:41.147 Current Schema Version: 1123
Starting up as the master server.
2006-08-29 20:17:41.153 New DB connection, total: 2
2006-08-29 20:17:41.154 Connected to database 'mythconverg' at host: localhost
2006-08-29 20:17:41.157 TVRec(1) Error: Problem finding starting channel, setting to default of '3'.
2006-08-29 20:17:41.159 ChannelBase(1) Error:
Could not get inputs for the capturecard.
Perhaps you have forgotten to bind video
sources to your card's inputs?
2006-08-29 20:17:41.159 Channel(/dev/video0) Error: SetInputAndFormat(-1, PAL)
while setting input (v4l v2)
eno: Invalid argument (22)
2006-08-29 20:17:41.160 Channel(/dev/video0) Error: SetInputAndFormat(-1, PAL)
while setting input (v4l v2)
eno: Invalid argument (22)
2006-08-29 20:17:41.164 Channel(/dev/video0): CheckChannel failed. Please verify channel "3" in the "mythtv-setup" Channel Editor.
2006-08-29 20:17:41.169 TVRec(1): Channel: '3' was not found in the database.
Most likely, the default channel set for this input
cardid 1, input 'Tuner'
in setup is wrong
2006-08-29 20:17:41.170 TVRec(1) Error: Couldn't find any channels in the database,
please make sure your inputs are associated
properly with your cards.
2006-08-29 20:17:41.181 TVRec(2) Error: Problem finding starting channel, setting to default of '3'.
2006-08-29 20:17:41.181 Channel()::Open(): Can't open video device, error "No such file or directory"
2006-08-29 20:17:41.181 Channel()::Open(): Can't open video device, error "No such file or directory"
2006-08-29 20:17:41.181 ChannelBase: Could not find input: Television on card when setting channel 3
2006-08-29 20:17:41.182 TVRec(2): Channel: '3' was not found in the database.
Most likely, the default channel set for this input
cardid 2, input ''
in setup is wrong
2006-08-29 20:17:41.183 TVRec(2) Error: Couldn't find any channels in the database,
please make sure your inputs are associated
properly with your cards.
2006-08-29 20:17:41.187 New DB connection, total: 3
2006-08-29 20:17:41.189 Connected to database 'mythconverg' at host: localhost
2006-08-29 20:17:41.346 New DB scheduler connection
2006-08-29 20:17:41.346 Connected to database 'mythconverg' at host: localhost
DVB is defined, but isn't attached to a cardinput.
2006-08-29 20:17:41.357 mythbackend version: 0.19.20060121-2 www.mythtv.org
2006-08-29 20:17:41.358 Enabled verbose msgs: important general
2006-08-29 20:17:41.358 AutoExpire: Found 3 recorders w/max rate of 216 MiB/min
2006-08-29 20:17:41.359 AutoExpire: Required Free Space: 2.7 GB w/freq: 5 min
2006-08-29 20:17:43.357 Reschedule requested for id -1.
2006-08-29 20:17:43.393 Scheduled 0 items in 0.0 = 0.01 match + 0.02 place
2006-08-29 20:17:43.395 Seem to be woken up by USER
Is this a problem with ivtv driver?
So how to attach my Card to inputs.
I am using Cable box and built myth TV on Suse 10.0
Suggest me regarding.
Raj.
On 8/29/06, Tim Scholl < [EMAIL PROTECTED]> wrote:On 7/1/06, Ramanraj Vamsi < [EMAIL PROTECTED]> wrote:Hi,
I wanna set up myth tv on my suse linux 10.0 .
But how to get my Tuner card working hauppage pvr 150.
I installed ivtv drivers version 0.44
But don't know the other requirements for making my tuner card work.
please suggest me!
Thank you.
Vamsy.
If you add the following line to your /etc/mythtv/modules/ivtv file it should find the PVR150
options ivtv tuner=-1,50
Or you can upgrade to ivtv 0.4.6
--Tim Scholl_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
Anyone else know how to handle this?
--
Tim
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
