|
Hi,
I have installed gentoo 2.6.17-r7 on a new
harddisk. It's a very minimal installation, no X or other big apps so
far.
I've installed a PVR 350.
Then I've installed ivtv 0.70.
I know, that modules are build by the kernel with
the current kernel and enabled them in the config. My config is mainly a copy of
a gentoo 2.6.14 version, where my card has running.
But with "modprobe ivtv" loading of some modules
fails:
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c
driver #0)
saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and autoselect ivtv0: Failed to load module tveeprom tveeprom 1-0050: Hauppauge model 48134, rev J342, serial# 7067564 tveeprom 1-0050: tuner model is Temic 4009FR5 (idx 42, type 20) tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 1-0050: audio processor is MSP4418 (idx 25) tveeprom 1-0050: decoder processor is SAA7115 (idx 19) tveeprom 1-0050: has radio, has IR remote ivtv0: Failed to load module tuner ivtv0: Failed to load module tda9887 ivtv0: Failed to load module saa7115 ivtv0: Failed to load module saa7127 ivtv0: Failed to load module msp3400 The modules are in the folder:
/lib/modules/2.6.17-gentoo-r7/kernel/drivers/media/video
I've put the modules in the file
/etc/modules.autoload.d/kernel-2.6 to be autoloaded by startup:
tveeprom
tuner tda9887 saa7115 saa7127 msp3400 And after reboot with lsmod I can see that the
modules can be found:
Module
Size Used
by
msp3400 24896 0 saa7127 9332 0 saa7115 12112 0 tda9887 13360 0 tuner 43788 0 tveeprom 12016 0 But when loading ivtv with modprobe loading of the
modules still fails.
Please tell me where my mistake is.
Thank you
|
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
