JOna wrote:
> Hi,
>
> Error report:
>
> kernel 2.6.17-1.2187_FC5
>
> ivtv-0.7.0 installed from source make; make install
>
> firmware-files from http://dl.ivtvdriver.org/ivtv/firmware/ 
> firmware.tar.gz unpacked into /lib/firmware
>
> /etc/modprobe.conf:
> # ivtv modules setup
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
>
> depmod -a
> modprobe ivtv
>
> creates this error:
>
> ivtv:  ==================== START INIT IVTV ====================
> ivtv:  version 0.7.0 (tagged release) loading
> ivtv:  Linux version: 2.6.17-1.2187_FC5 mod_unload 686 REGPARM  
> 4KSTACKS gcc-4.1
> ivtv:  In case of problems please include the debug info between
> ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
> ivtv:  any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
> msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
> ivtv0 warning: Encoder mailbox not found
> ivtv0 warning: Decoder mailbox not found
> ivtv0: Error locating firmware.
> ivtv0: Error -12 on initialization
> ivtv: probe of 0000:00:0a.0 failed with error -12
> ivtv:  ====================  END INIT IVTV  ====================
>
>
> The card does not work. Is there anything I can do?
>
> JOna


I installed yesterday the new version (ivtv-0.7.1) and now my  
mythtv-2.0 mediacenter in Fedora Core 5 works again! :-)

Thanks for the developers!

Hardware:
Asus A7V880, VIA KT880 motherboard (VIA-boards are not recommended,  
but is/was it only timing issue in ivtv?)
Athlon XP 2800+ (2100MHz)
1GB Dual Channel HyperX -memory
Hauppauge PVR-350
Matroxx G400/G450 video
2 x 300GB SATA disks



dmesg:
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.7.1 (tagged release) loading
ivtv:  Linux version: 2.6.17-1.2187_FC5 mod_unload 686 REGPARM  
4KSTACKS gcc-4.1
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB  
total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB  
total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB  
total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers  
(2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB  
total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB  
total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB  
total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv:  ====================  END INIT IVTV  ====================




_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to