Am Dienstag 26 September 2006 20:54 schrieb Sander Sweers: > Matthias Meyer wrote: > > Hello, > > > > I use Debian with kernel 2.6.16, ivtv 0.6 and PVR350. > > After a couple of months I reached my first goal to get the X-Windows > > (xserver-xorg 6.9.0) on my TV. Thats work and therfore I hope ivtv will > > work. > > > > Now I test my card: > > > > ivctl -r 639 > > cat /dev/video > /Media/test.mpg > > xine /Media/test.mpg > > Try: ivtv-tune -f 639 > > It will tell you if it finds a signal "signal detected". > > The ivtv log was fine as far as I could tell. > > Greets > Thanks:
vdr:~# ivtv-tune -f 639 /dev/video0: 639.000 MHz vdr:~# cat /dev/video0 > /Media/test.mpg xine /Media/test.mpg The screen stays black. I've found the following error-messages in /var/log/Xorg.0.log: (II) Setting vga for screen 0. (EE) IVTVDEV_TST(0)Framebuffer id from dev /dev/fb0is 0 (EE) IVTVDEV_TST(0)open /dev/video48 returned 7 (EE) IVTVDEV_TST(0)get_fb returned 0 fbid 0 (**) IVTVDEV_TST(0)Depth 24, (**) framebuffer bpp 32 and remember the message in /var/log/messages; Sep 28 08:22:32 vdr kernel: ivtv0-osd warning: ivtvfb_check_var Sep 28 08:22:32 vdr last message repeated 2 times Sep 28 08:22:32 vdr kernel: ivtv0-osd warning: ivtvfb_set_par Sep 28 08:29:47 vdr kernel: ivtv0: All encoder MPEG stream buffers are full. Dropping data. Sep 28 08:29:47 vdr kernel: ivtv0: Cause: the application is not reading fast enough. Is there an additionallog for ivtv? Where I can find it? Thanks Matthias -- Don't Panic _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
