On further investigation it looks like the tuner is not tuning to any
frequency because of the following messages in dmesg dump:

ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000008 not found for command 0x4008646d!
ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!

But I don't know how to fix this.

Here is what you asked for:
# lsmod
Module                  Size  Used by
cx8800                 23692  0
cx88xx                 50340  1 cx8800
bttv                  145396  0
video_buf              17412  3 cx8800,cx88xx,bttv
ir_common              23172  2 cx88xx,bttv
btcx_risc               3720  3 cx8800,cx88xx,bttv
Rlirc_i2c                7172  2
lirc_dev               10724  1 lirc_i2c
msp3400                25120  0
saa7127                 9620  0
saa7115                12432  0
tda9887                13584  0
tuner                  43948  0
ivtv                  156304  1
tveeprom               12304  3 cx88xx,bttv,ivtv
intel_agp              17820  1
agpgart                22576  1 intel_agp
smbfs                  49912  2
dmfe                   14876  0

Relevant .config dump
-------------------
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y

#
# Video Capture Adapters
#

#
# Video Capture Adapters
#
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_SAA6588 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Encoders and Decoders
#
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_CS53L32A is not set
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA7127=m
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_USB_DABUSB is not set

On 9/30/06, Maarten Maathuis <[EMAIL PROTECTED]> wrote:
> Two things:
>
> Don't you need to specifiy a frequency table for ivtv-tune?
>
> Could you give a lsmod and your .config of your kernel?
>
>
> On 9/30/06, Janardhanan Radhakrishnan <[EMAIL PROTECTED]> wrote:
> >
> > Anybody who could help here?
> >
> > -Jana
> >
> > On 9/28/06, Janardhanan Radhakrishnan <[EMAIL PROTECTED]> wrote:
> > > Hi,
> > >
> > > I am trying to trouble-shoot a problem in ivtv, where I couldn't get any
> > > video encoded. It used to work before and I guess I upgraded to ivtv
> 0.7.0
> > > and I am facing problems since then.  The current problem is there is no
> > > signal detected when I tune to a channel using ivtv-tune:
> > >
> > >  # ivtv-tune -c 3
> > > /dev/video0: 61.250 MHz
> > >
> > > cat /dev/video0 > t.mpg results in 0 byte file
> > >
> > > Any leads? I am attaching the ivtv-log dump here:
> > >
> > > ivtv:  ==================== START INIT IVTV ====================
> > > ivtv:  version 0.7.0 (tagged release) loading
> > > ivtv:  Linux version: 2.6.17-gentoo-r8 mod_unload PENTIUM4 REGPARM
> gcc-4.1
> > > ivtv:  In case of problems please include the debug info between
> > > ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
> > > ivtv:  any module options, when mailing the ivtv-users mailinglist.
> > > ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
> > > ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 19
> > > saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> > > saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
> > > lirc_i2c: chip found @ 0x18 (Hauppauge IR)
> > > lirc_dev: lirc_register_plugin: sample_rate: 10
> > > tveeprom 1-0050: Hauppauge model 48132, rev K268, serial# 9868758
> > > tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
> > > tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
> > > tveeprom 1-0050: audio processor is MSP4448 (idx 27)
> > > tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
> > > tveeprom 1-0050: has radio, has IR remote
> > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > >  ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
> > > ivtv0: Encoder revision: 0x02050032
> > > ivtv0: Decoder revision: 0x02020023
> > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> > > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB
> total)
> > > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
> total)
> > > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> > > total)
> > > ivtv0: Create encoder radio stream
> > > ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB
> total)
> > > ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB
> total)
> > > ivtv0: Create decoder VOUT stream
> > > ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB
> total)
> > > ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
> > > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!
> > > ivtv0: i2c hardware 0x00000008 not found for command 0x4008646d!
> > > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!
> > > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!
> > > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c!
> > > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
> > > ivtv:  ====================  END INIT IVTV
> ====================
> > >
> > > # ivtv-detect
> > > driver:   ivtv-0.7.0 (tagged release)
> > > card:     Hauppauge WinTV PVR-350, bus info 0000:02:08.0, ivtv card #0
> > > hardware: saa7115 saa7127 tveeprom
> > >      /dev/v4l/video0: MPG encoding (links: /dev/video0)
> > >      /dev/v4l/radio0: Radio        (links: /dev/radio0)
> > >        /dev/v4l/vbi0: VBI encoding (links: /dev/vbi0)
> > >        /dev/v4l/vbi8: VBI from MPG (links: /dev/vbi8)
> > >     /dev/v4l/video16: MPG decoding (links: /dev/video16)
> > >       /dev/v4l/vbi16: VBI decoding (links: /dev/vbi16)
> > >     /dev/v4l/video24: PCM encoding (links: /dev/video24)
> > >     /dev/v4l/video32: YUV encoding (links: /dev/video32)
> > >     /dev/v4l/video48: YUV decoding (links: /dev/video48)
> > >
> > >
> >
> > _______________________________________________
> > ivtv-users mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
>

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to