Anybody who could help here? -Jana
On 9/28/06, Janardhanan Radhakrishnan <[EMAIL PROTECTED]> wrote: > Hi, > > I am trying to trouble-shoot a problem in ivtv, where I couldn't get any > video encoded. It used to work before and I guess I upgraded to ivtv 0.7.0 > and I am facing problems since then. The current problem is there is no > signal detected when I tune to a channel using ivtv-tune: > > # ivtv-tune -c 3 > /dev/video0: 61.250 MHz > > cat /dev/video0 > t.mpg results in 0 byte file > > Any leads? I am attaching the ivtv-log dump here: > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.7.0 (tagged release) loading > ivtv: Linux version: 2.6.17-gentoo-r8 mod_unload PENTIUM4 REGPARM gcc-4.1 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) > ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 19 > saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) > saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) > lirc_i2c: chip found @ 0x18 (Hauppauge IR) > lirc_dev: lirc_register_plugin: sample_rate: 10 > tveeprom 1-0050: Hauppauge model 48132, rev K268, serial# 9868758 > tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) > tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 1-0050: audio processor is MSP4448 (idx 27) > tveeprom 1-0050: decoder processor is SAA7115 (idx 19) > tveeprom 1-0050: has radio, has IR remote > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Decoder revision: 0x02020023 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv0: Create encoder radio stream > ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) > ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) > ivtv0: Create decoder VOUT stream > ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) > ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! > ivtv0: i2c hardware 0x00000008 not found for command 0x4008646d! > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > ivtv: ==================== END INIT IVTV ==================== > > # ivtv-detect > driver: ivtv-0.7.0 (tagged release) > card: Hauppauge WinTV PVR-350, bus info 0000:02:08.0, ivtv card #0 > hardware: saa7115 saa7127 tveeprom > /dev/v4l/video0: MPG encoding (links: /dev/video0) > /dev/v4l/radio0: Radio (links: /dev/radio0) > /dev/v4l/vbi0: VBI encoding (links: /dev/vbi0) > /dev/v4l/vbi8: VBI from MPG (links: /dev/vbi8) > /dev/v4l/video16: MPG decoding (links: /dev/video16) > /dev/v4l/vbi16: VBI decoding (links: /dev/vbi16) > /dev/v4l/video24: PCM encoding (links: /dev/video24) > /dev/v4l/video32: YUV encoding (links: /dev/video32) > /dev/v4l/video48: YUV decoding (links: /dev/video48) > > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
