I have a PVR 150 and 250. Since the 7.1 update, the DMA errors have eliminated. Thanks Hans.
However I still get freeze ups on my machine. It only happens with Live TV in Myth. Recordings are fine. The first time you watch Live TV, it works fine. Cancel and go in again and the firmware is unresponsive: > ivtv0 warning: 1000 ms time out waiting for firmware > ivtv0 warning: Failed api call 0x00000082 with result 0xfffffff0 > ivtv0 warning: ENC: Failed stopping capture -16 > ivtv0 warning: 1000 ms time out waiting for firmware > ivtv0 warning: Failed api call 0x000000c6 with result 0xfffffff0 These two cards worked flawlessly until the newest version of the firmware was installed in July. Since then the 150 is not behaving. Dmesg: > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.7.1 (tagged release) loading > ivtv: Linux version: 2.6.17-1.2142_FC4smp SMP mod_unload gcc-4.0 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv0: Create encoder radio stream > ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 > ivtv: ====================== NEXT CARD ====================== > ivtv1: Autodetected Hauppauge WinTV PVR-250 card (cx23416 based) > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) > saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) > msp3400 2-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #1) > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv1: Encoder revision: 0x02050032 > ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) > ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) > ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv1: Initialized Hauppauge WinTV PVR-250, card #1 > ivtv: ==================== END INIT IVTV ==================== Would it help to go to a previous version of firmware? Where I can find it? Thanks Preet _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
