Hans Verkuil <[EMAIL PROTECTED]> wrote:
On Thursday 05 October 2006 20:39, Martin Fitzgerald wrote:Hans - thanks for the quick reply. Guess I'll have to go with plan B for the timebeing then. If i can help by testing patches let me know..
> I am having some difficulty getting a second pvr-350's frame buffer
> device working. My goal is to have the tv-out portion of each pvr-350
> controlling tv's in different rooms (will need to figure out lirc
> issues later). Unfortunately while everything works great with one
> pvr350 installed (either one so its not hardware) the second card
> will not get its own /dev/fb1 device created for it. I can still use
> both cards capture capabilities however without the /dev/fb1 on the
> second card i cant get X started. This is on FC5 with ivtv drivers
> 0.7.1/kernel 2.6.17 (mythtv 0.20 if it matters). Below is the output
> of dmesg:
>
> If i look at the end of this i see where we create /dev/fb0 - but
> dont see it creating /dev/fb1. Any ideas?
Hi Martin,
This doesn't (yet) work. It's a known bug. Probably 90% of the work is
done, but there is still some work remaining to make this happen.
Hans
Marty
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1ยข/min.
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
