I have a new PVR-150 and I followed Jarod Wilson's instructions for getting ivtv installed. I got video to work the other day, but I could not change channels. Yesterday I ran "yum update" to see if it would help with the channel changing problem, and now video doesn't work and my ivtvctl program is missing the -p and -u parameters.
When I use ivtv-tune to change channels, I get the following errors in /var/log/messages: Oct 23 09:19:45 jacobs kernel: ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! Oct 23 09:19:45 jacobs kernel: tuner 3-0061: i2c i/o error: rc == -121 (should be 4) Oct 23 09:19:45 jacobs kernel: wm8775 3-001b: I2C: cannot write 0c0 to register R21 Oct 23 09:19:45 jacobs kernel: wm8775 3-001b: I2C: cannot write 1d4 to register R14 Oct 23 09:19:45 jacobs kernel: wm8775 3-001b: I2C: cannot write 1d4 to register R15 Oct 23 09:19:45 jacobs kernel: wm8775 3-001b: I2C: cannot write 102 to register R21 Oct 23 09:19:45 jacobs kernel: ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! Here's what my IVTV INIT says: Oct 23 08:41:19 jacobs kernel: ivtv: ==================== START INIT IVTV ==================== Oct 23 08:41:19 jacobs kernel: ivtv: version 0.8.0 (tagged release) loading Oct 23 08:41:19 jacobs kernel: ivtv: Linux version: 2.6.18-1.2200.fc5 mod_unload 686 REGPARM 4KSTACKS gcc-4.1 Oct 23 08:41:19 jacobs kernel: ivtv: In case of problems please include the debug info between Oct 23 08:41:19 jacobs kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Oct 23 08:41:19 jacobs kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Oct 23 08:41:19 jacobs kernel: ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) Oct 23 08:41:19 jacobs kernel: ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 Oct 23 08:41:19 jacobs kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Oct 23 08:41:19 jacobs kernel: tveeprom 3-0050: Ran out of data! Oct 23 08:41:19 jacobs kernel: ivtv0: No tuner detected, default to NTSC Oct 23 08:41:19 jacobs kernel: USB Universal Host Controller Interface driver v3.0 Oct 23 08:41:19 jacobs kernel: Floppy drive(s): fd0 is 1.44M Oct 23 08:41:19 jacobs kernel: tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0) Oct 23 08:41:19 jacobs kernel: FDC 0 is a National Semiconductor PC87306 Oct 23 08:41:19 jacobs kernel: wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0) Oct 23 08:41:19 jacobs kernel: ivtv0: Encoder revision: 0x02050032 Oct 23 08:41:19 jacobs kernel: ivtv0: Registered device video0 for encoder MPEG Oct 23 08:41:19 jacobs kernel: ivtv0: Registered device video32 for encoder YUV Oct 23 08:41:19 jacobs kernel: ivtv0: Registered device vbi0 for encoder VBI Oct 23 08:41:19 jacobs kernel: ivtv0: Registered device video24 for encoder PCM audio Oct 23 08:41:19 jacobs kernel: tuner 3-0061: type set to 0 (Temic PAL (4002 FH5)) Oct 23 08:41:19 jacobs kernel: ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! Oct 23 08:41:19 jacobs kernel: ivtv0: i2c addr 0x44 not found for command 0x4008646f! Oct 23 08:41:19 jacobs kernel: ivtv0: i2c hardware 0x00000001 not found for command 0x4008646d! Oct 23 08:41:19 jacobs kernel: ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! Oct 23 08:41:19 jacobs last message repeated 2 times Oct 23 08:41:19 jacobs kernel: ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 Oct 23 08:41:19 jacobs kernel: ivtv: ==================== END INIT IVTV ==================== I am using Fedora Core 5. Note that I've tries cold-booting several times. Thanks for any help, John _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
