I have a Hauppauge PVR-150 (model 1062) running under Ubuntu Breezy  
(5.10) (i386 NOT amd64 version) with ubuntu's kernel 2.6.12-10-386 on  
a MSI K8T Neo (Via K8T800 chipset) motherboard. Previously I was not  
getting DMA errors when I was using 0.4.4 on 2.6.12. I upgraded to  
Ubuntu 6.06 with 2.6.15 and also upgraded ivtv to 0.4.7. Now I am  
getting DMA errors like seen below in my dmesg (I also tried the  
latest svn, as you can see in the dmesg). The driver does not seem to  
recover from these errors. The DMA errors that people mentioned  
before were fixed with the patch that went into 0.4.7 so I was  
wondering if this a different error

Thanks for your help!
-Ed


[17179591.760000] ivtv:  ==================== START INIT IVTV  
====================
[17179591.760000] ivtv:  version 0.4.8 (development revision 3457)  
loading
[17179591.760000] ivtv:  Linux version: 2.6.15-27-386 preempt 486  
gcc-4.0
[17179591.760000] ivtv:  In case of problems please include the debug  
info between
[17179591.760000] ivtv:  the START INIT IVTV and END INIT IVTV lines,  
along with
[17179591.760000] ivtv:  any module options, when mailing the ivtv- 
users mailinglist.
[17179591.760000] ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
[17179591.760000] ivtv0: Unreasonably low latency timer, setting to  
64 (was 32)
[17179592.016000] tveeprom: ivtv version
[17179592.016000] ivtv0: i2c attach to card #0 ok [client=tveeprom,  
addr=50]
[17179592.076000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv  
i2c driver #0
[17179592.076000] ivtv0: i2c attach to card #0 ok [client=(tuner  
unset), addr=61]
[17179592.256000] cx25840 1-0044: ivtv driver
[17179592.256000] cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c  
driver #0)
[17179596.712000] ivtv0: i2c attach to card #0 ok [client=cx25840,  
addr=44]
[17179596.748000] wm8775 0-001b: ivtv driver
[17179596.756000] ivtv0: i2c attach to card #0 ok [client=, addr=1b]
[17179597.440000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144  
bytes)
[17179597.656000] ivtv0: Encoder revision: 0x02050032
[17179597.656000] ivtv0: Allocate DMA encoder MPEG stream: 128 x  
32768 buffers (4096KB total)
[17179597.656000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800  
buffers (2048KB total)
[17179597.656000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472  
buffers (2048KB total)
[17179597.656000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x  
4608 buffers (2048KB total)
[17179597.656000] tuner: type set to 50 (TCL 2002N) by ivtv i2c  
driver #0
[17179597.736000] ivtv0: Initialized WinTV PVR 150, card #0
[17179597.736000] ivtv:  ====================  END INIT IVTV   
====================
[17405636.040000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b 00020001
[17405636.040000] ivtv0 warning: offset 0 -> 128
[17405636.076000] ivtv0 warning: offset 128 -> 0
[17405674.880000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b 00020005
[17405674.880000] ivtv0 warning: offset 0 -> 128
[17405675.008000] ivtv0 warning: offset 128 -> 0
[17406033.788000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b 00020005
[17406033.788000] ivtv0 warning: offset 0 -> 128
[17406033.848000] ivtv0 warning: offset 128 -> 0
[17407292.252000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b 00020001
[17407292.252000] ivtv0 warning: offset 0 -> 128
[17407292.640000] ivtv0 warning: offset 128 -> 0
[17409483.860000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b 00020005
[17409483.860000] ivtv0 warning: offset 0 -> 128
[17409484.688000] ivtv0 warning: offset 128 -> 0
[17410085.176000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b 00020001
[17410085.176000] ivtv0 warning: ENC: (1) DMA Error 0x0000000b 00020001
[17410085.180000] ivtv0 warning: offset 0 -> 128
[17410085.308000] ivtv0 warning: offset 128 -> 92


_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to