Hello, I have just installed Mandriva 2007 and it appears that ivtv version .7 is already installed for me but I am not sure. Everything checks out in the dmesg terminal window (see below) but the utilities are not to be found anywhere, such as ivtv-tune or ivtvctl. I have a video0, video1, video2, video 24, and a video 32 in the device directory (I have more than one capture device).
If ivtv is indeed installed correctly, how can I access the ivtv utilities, like if I want to change the video input? I have used the file search for the utilities but it came back with nothing. The utilities don't seem to be anywhere on my computer. Thanks, Roy ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (tagged release) loading ivtv: Linux version: 2.6.17-5mdv SMP mod_unload 686 gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 22 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #0) tveeprom 2-0050: Hauppauge model 26552, rev C268, serial# 8754695 tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) Vendor: WD Model: 2500JB External Rev: 0412 Type: Direct-Access ANSI SCSI revision: 00 Vendor: ST380021 Model: A Rev: 0000 Type: Direct-Access ANSI SCSI revision: 00 usb-storage: device scan complete usb-storage: device scan complete wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 33 00 00 00 sda: assuming drive cache: write through SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 33 00 00 00 sda: assuming drive cache: write through sda:<5>sd 1:0:0:0: Attached scsi generic sg0 type 0 0:0:0:0: Attached scsi generic sg1 type 0 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner 2-0061: type set to 47 (LG NTSC (TAPE series)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
