Hello all, i have a Hauppauge PVR 350 with a Philips FM1216 ME MK3 inside. Last week i've update my box to 2.6.18 and ivtv 0.8 Everthing seems okay but then i noticed that i can't receive some Channels In Germany this Channels called "Sonderkanäle" i.e. SE07 (142,25 Mhz) This channel is used by RTL but i get only snow.
I think i have a problem with the tuner (see dmesg) ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.0 (tagged release) loading ivtv: Linux version: 2.6.18 mod_unload PENTIUMM gcc-3.3 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) tveeprom 3-0050: Hauppauge model 48139, rev K257, serial# 7956003 tveeprom 3-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 3-0050: audio processor is MSP4418 (idx 25) tveeprom 3-0050: decoder processor is SAA7115 (idx 19) tveeprom 3-0050: has radio, has IR remote tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) saa7127 3-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) msp3400 3-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) msp3400 3-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG ivtv0: Registered device vbi8 for decoder VBI ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 3-0061: type set to 52 (Thomson DTT 7610 (ATSC/NTSC)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== tuner 57 found, but tuner 52 was selected. in /etc/modules.conf i wrote options ivtv tuner=38 with no success. Always tuner 52 is used please help me ! andreas -- "Ein Herz für Kinder" - Ihre Spende hilft! Aktion: www.deutschlandsegelt.de Unser Dankeschön: Ihr Name auf dem Segel der 1. deutschen America's Cup-Yacht! _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
