Hi folks,
I have a small problem here with my PVR-500 MCE. ( please don't be
confused with video0, 1, or 2, since I have a Terratec 250 installed
also which is /dev/video0 )
I am installing ivtv / mythtv / linux for about a week now, and finally
got a quite working configuration.
But, I now only have one tuner, over which I can only configure the
first /dev/video1 . the /dev/video2 is not affected by tuning commands
when set to tuner 1
Iam using the ivtv version coming with ubuntu 6.10. Here is the output
of ivtvctl -n -d /dev/video1,
~$ ivtvctl -n -d /dev/video1
ioctl: VIDIOC_ENUMINPUT
Input : 0
Name : Tuner 1
Type : 0x00000001
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x00000000000000FF ( PAL )
Status : 0
Input : 1
Name : S-Video 1
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 2
Name : Composite 1
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 3
Name : S-Video 2
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 4
Name : Composite 2
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
While it shows both S-Video / Composit Inputs, only one Tuner is listed.
A while ago ( under Debian with some ivtv 0.3.x version of ivtv) it
showed two tuners.
Now my question is if this is a known problem, should I take another
firmware ( I downloaded it from the net and did not use the supplied
Hauppauge files ), or something like that ?
I hope I provided enough informations.
Thx in advance,
Maddi
P.S.: The dmesg output of the ivtv driver:
[17179585.096000] ivtv: ==================== START INIT IVTV
====================
[17179585.096000] ivtv: version 0.7.0 (tagged release) loading
[17179585.096000] ivtv: Linux version: 2.6.17-10-generic SMP mod_unload
586 REGPARM gcc-4.1
[17179585.096000] ivtv: In case of problems please include the debug
info between
[17179585.096000] ivtv: the START INIT IVTV and END INIT IVTV lines,
along with
[17179585.096000] ivtv: any module options, when mailing the ivtv-users
mailinglist.
[17179585.192000] saa7133[0]: i2c eeprom 00: 3b 15 60 11 54 20 1c 00 43
43 a9 1c 55 d2 b2 92
[17179585.192000] saa7133[0]: i2c eeprom 10: 00 00 20 00 ff 20 ff ff ff
ff ff ff ff ff ff ff
[17179585.192000] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08
01 00 9c ff ff ff ff
[17179585.192000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[17179585.192000] saa7133[0]: i2c eeprom 40: ff 22 00 c2 96 00 01 30 ff
ff ff ff ff ff ff ff
[17179585.192000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[17179585.192000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[17179585.192000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[17179585.332000] tuner 2-004b: chip found @ 0x96 (saa7133[0])
[17179585.392000] tuner 2-004b: setting tuner address to 61
[17179585.440000] tuner 2-004b: type set to tda8290+75a
[17179585.528000] saa7133[0]: registered device video0 [v4l2]
[17179585.528000] saa7133[0]: registered device vbi0
[17179585.528000] saa7133[0]: registered device radio0
[17179585.540000] ivtv0: Autodetected Hauppauge WinTV PVR-150 card
(cx23416 based)
[17179585.540000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[17179585.540000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC2] ->
GSI 17 (level, high) -> IRQ 209
[17179585.540000] ivtv0: Unreasonably low latency timer, setting to 64
(was 32)
[17179585.672000] tuner 3-0060: TEA5767 detected.
[17179585.672000] tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #0)
[17179585.672000] tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio)
[17179585.672000] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[17179585.884000] saa7134 ALSA driver for DMA sound loaded
[17179585.884000] saa7133[0]/alsa: saa7133[0] at 0xe0000000 irq 201
registered as card -1
[17179585.892000] NET: Registered protocol family 17
[17179585.952000] tveeprom 3-0050: Hauppauge model 23559, rev D591,
serial# 2990746
[17179585.952000] tveeprom 3-0050: tuner model is Philips FQ1216AME MK4
(idx 91, type 56)
[17179585.952000] tveeprom 3-0050: TV standards PAL(B/G) PAL(I)
SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
[17179585.952000] tveeprom 3-0050: second tuner model is Philips
TEA5768HL FM Radio (idx 101, type 62)
[17179585.952000] tveeprom 3-0050: audio processor is CX25843 (idx 37)
[17179585.952000] tveeprom 3-0050: decoder processor is CX25843 (idx 30)
[17179585.952000] tveeprom 3-0050: has radio, has no IR remote
[17179585.952000] ivtv0: This is the first unit of a PVR500
[17179586.008000] tda9887 3-0043: chip found @ 0x86 (ivtv i2c driver #0)
[17179586.048000] cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c
driver #0)
[17179587.868000] NET: Registered protocol family 10
[17179587.868000] lo: Disabled Privacy Extensions
[17179587.868000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[17179587.868000] IPv6 over IPv4 tunneling driver
[17179590.192000] cx25840 3-0044: loaded v4l-cx25840.fw firmware (14264
bytes)
[17179590.312000] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0)
[17179591.016000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[17179591.236000] ivtv0: Encoder revision: 0x02050032
[17179591.240000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
[17179591.240000] ivtv0: Allocate DMA encoder YUV stream: 161 x 12960
buffers (2048KB total)
[17179591.240000] ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
buffers (2048KB total)
[17179591.240000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
[17179591.240000] ivtv0: Create encoder radio stream
[17179591.240000] tuner 3-0061: type set to 56 (Philips PAL/SECAM multi
(FQ1216AME MK4))
[17179591.404000] ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
[17179591.404000] ivtv: ====================== NEXT CARD
======================
[17179591.404000] ivtv1: Autodetected Hauppauge WinTV PVR-150 card
(cx23416 based)
[17179591.404000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC3] ->
GSI 18 (level, high) -> IRQ 201
[17179591.404000] ivtv1: Unreasonably low latency timer, setting to 64
(was 32)
[17179591.540000] tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #1)
[17179591.760000] tda9887 4-0043: chip found @ 0x86 (ivtv i2c driver #1)
[17179591.780000] cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c
driver #1)
[17179595.840000] cx25840 4-0044: loaded v4l-cx25840.fw firmware (14264
bytes)
[17179595.936000] wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #1)
[17179596.004000] tveeprom 4-0050: Hauppauge model 23559, rev D591,
serial# 2990746
[17179596.004000] tveeprom 4-0050: tuner model is Philips FQ1216AME MK4
(idx 91, type 56)
[17179596.004000] tveeprom 4-0050: TV standards PAL(B/G) PAL(I)
SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
[17179596.004000] tveeprom 4-0050: second tuner model is Philips
TEA5768HL FM Radio (idx 101, type 62)
[17179596.004000] tveeprom 4-0050: audio processor is CX25843 (idx 37)
[17179596.004000] tveeprom 4-0050: decoder processor is CX25843 (idx 30)
[17179596.004000] tveeprom 4-0050: has radio, has no IR remote
[17179596.004000] ivtv1: This is the second unit of a PVR500
[17179596.004000] ivtv1: Correcting tveeprom data: no radio present on
second unit
[17179596.724000] ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[17179596.940000] ivtv1: Encoder revision: 0x02050032
[17179596.944000] ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
[17179596.944000] ivtv1: Allocate DMA encoder YUV stream: 161 x 12960
buffers (2048KB total)
[17179596.944000] ivtv1: Allocate DMA encoder VBI stream: 80 x 26208
buffers (2048KB total)
[17179596.944000] ivtv1: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
[17179596.944000] tuner 4-0061: type set to 56 (Philips PAL/SECAM multi
(FQ1216AME MK4))
[17179597.108000] ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
[17179597.108000] ivtv: ==================== END INIT IVTV
====================
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
