I have problems with the activation of my Hauppauge 350 TV card.
I've followed the guide at edgy IVTV guide
(https://help.ubuntu.com/community/Install_IVTV_Edgy)
<https://help.ubuntu.com/community/Install_IVTV_Edgy>
As far as I can judge the activation of the IVTV driver was succesfull.
Also the setting of the frequency went ok:
ivtv-tune -t europe-west -c E12 ==> /dev/video0: 224.250 MHz
(I'm living in Belgium. Our television distributor is Telenet. 224.250
Mhz is the frequency for the VTM channel)
But when I issue: mplayer /dev/video0 I get only a screen with noise
For the moment I'm a bit disappointed because the reason I bought the
350 was because it was one of the cards that was best supported
under Linux. Therefore I've the feeling that may be some detail
(ivtvctl setting ?) must be changed but I have no clue what I should try
I hope someone can help me solve this problem.
Thank you for taking time to look into this problem.
Best regards,
Peter
Information regarding my setup:
- the card works under Windows XP so the hardware is ok
- I'm using Ubuntu Edge as my main OS
- output of uname -a: Linux test 2.6.17-10-generic #2 SMP Fri Oct 13
18:45:35 UTC 2006 i686 GNU/Linux
- output of dmesg:
[17179586.036000] ivtv: ==================== START INIT IVTV
====================
[17179586.036000] ivtv: version 0.7.0 (tagged release) loading
[17179586.036000] ivtv: Linux version: 2.6.17-10-generic SMP mod_unload
586 REGPARM gcc-4.1
[17179586.036000] ivtv: In case of problems please include the debug
info between
[17179586.036000] ivtv: the START INIT IVTV and END INIT IVTV lines,
along with
[17179586.036000] ivtv: any module options, when mailing the ivtv-users
mailinglist.
[17179586.068000] bcm43xx driver
[17179586.424000] NET: Registered protocol family 17
[17179586.600000] ivtv0: Autodetected Hauppauge WinTV PVR-350 card
(cx23415 based)
[17179586.600000] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level,
low) -> IRQ 66
[17179586.644000] tveeprom 0-0050: Hauppauge model 48139, rev K2B7,
serial# 8889298
[17179586.644000] tveeprom 0-0050: tuner model is Philips FM1216ME MK5
(idx 117, type 4)
[17179586.644000] tveeprom 0-0050: TV standards PAL(B/G) PAL(I)
SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
[17179586.644000] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
[17179586.644000] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
[17179586.644000] tveeprom 0-0050: has radio, has IR remote
[17179586.708000] eth1: register 'asix' at usb-0000:00:1d.7-3, ASIX
AX88772 USB 2.0 Ethernet, 00:30:4f:43:83:a7
[17179586.708000] usbcore: registered new driver asix
[17179586.716000] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[17179586.908000] tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
[17179586.960000] saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
[17179587.156000] saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
[17179587.176000] msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c
driver #0)
[17179587.176000] msp3400 0-0040: MSP4418G-B3 supports nicam and radio,
mode is autodetect and autoselect
[17179587.828000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[17179587.840000] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
[17179588.072000] ivtv0: Encoder revision: 0x02050032
[17179588.080000] ivtv0: Decoder revision: 0x02020023
[17179588.080000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
[17179588.080000] ivtv0: Allocate DMA encoder YUV stream: 161 x 12960
buffers (2048KB total)
[17179588.080000] ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
buffers (2048KB total)
[17179588.080000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
[17179588.080000] ivtv0: Create encoder radio stream
[17179588.080000] ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536
buffers (1024KB total)
[17179588.080000] ivtv0: Allocate DMA decoder VBI stream: 512 x 2048
buffers (1024KB total)
[17179588.080000] ivtv0: Create decoder VOUT stream
[17179588.080000] ivtv0: Allocate DMA decoder YUV stream: 20 x 51840
buffers (1024KB total)
[17179588.160000] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
[17179588.292000] tuner 0-0061: tuner type not set
[17179588.368000] tuner 0-0061: tuner type not set
[17179588.392000] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
[17179588.392000] ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 22 (level,
low) -> IRQ 217
[17179588.400000] ivtv: ==================== END INIT IVTV
====================
- output of ivtvctl -a:
ioctl IVTV_IOC_G_CODEC ok
Codec parameters
aspect : 2
audio : 0x00e9
bframes : 3
bitrate_mode: 0
bitrate : 8000000
bitrate_peak: 9600000
dnr_mode : 0
dnr_spatial : 0
dnr_temporal: 8
dnr_type : 0
framerate : 0
framespergop: 12
gop_closure : 1
pulldown : 0
stream_type : 14
ioctl VIDIOC_G_FMT ok
Type : Video Capture
Width : 720
Height : 576
ioctl VIDIOC_QUERYCAP ok
Driver name : ivtv
Card type : Hauppauge WinTV PVR-350
Bus info : 0000:01:01.0
Driver version: 1792
Capabilities : 0x010700F3
ioctl: VIDIOC_ENUMINPUT
Input : 0
Name : Tuner 1
Type : 0x00000001
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x00000000000000FF ( PAL )
Status : 0
Input : 1
Name : S-Video 1
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 2
Name : Composite 1
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 3
Name : S-Video 2
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 4
Name : Composite 2
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 5
Name : Composite 3
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
ioctl VIDIOC_G_INPUT ok
Video input = 0
ioctl: VIDIOC_ENUMOUTPUT
Output : 0
Name : S-Video + Composite
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Output : 1
Name : Composite
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Output : 2
Name : S-Video
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Output : 3
Name : RGB
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Output : 4
Name : YUV C
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Output : 5
Name : YUV V
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
ioctl VIDIOC_G_OUTPUT ok
Output = 0
ioctl: VIDIOC_ENUMAUDIO
Input : 0
Name : Tuner 1
Input : 1
Name : Line In 1
Input : 2
Name : Line In 2
ioctl VIDIOC_G_AUDIO ok
Audio input = 0: Tuner 1
ioctl VIDIOC_G_FREQUENCY ok
Frequency = 3588
ioctl: VIDIOC_ENUMSTD
index : 0
ID : 0x000000000000000F
Name : PAL-BGH
Frame period: 1/25
Frame lines : 625
index : 1
ID : 0x00000000000000E0
Name : PAL-DK
Frame period: 1/25
Frame lines : 625
index : 2
ID : 0x0000000000000010
Name : PAL-I
Frame period: 1/25
Frame lines : 625
index : 3
ID : 0x0000000000000100
Name : PAL-M
Frame period: 1001/30000
Frame lines : 525
index : 4
ID : 0x0000000000000200
Name : PAL-N
Frame period: 1/25
Frame lines : 625
index : 5
ID : 0x0000000000000400
Name : PAL-Nc
Frame period: 1/25
Frame lines : 625
index : 6
ID : 0x00000000000D0000
Name : SECAM-BGH
Frame period: 1/25
Frame lines : 625
index : 7
ID : 0x0000000000320000
Name : SECAM-DK
Frame period: 1/25
Frame lines : 625
index : 8
ID : 0x0000000000400000
Name : SECAM-L
Frame period: 1/25
Frame lines : 625
index : 9
ID : 0x0000000000800000
Name : SECAM-L'
Frame period: 1/25
Frame lines : 625
index : 10
ID : 0x0000000000001000
Name : NTSC-M
Frame period: 1001/30000
Frame lines : 525
index : 11
ID : 0x0000000000002000
Name : NTSC-J
Frame period: 1001/30000
Frame lines : 525
index : 12
ID : 0x0000000000008000
Name : NTSC-K
Frame period: 1001/30000
Frame lines : 525
ioctl VIDIOC_G_STD ok
Video standard = 0x000000ff
ioctl: VIDIOC_QUERYCTRL
Brightness = 128
Contrast = 64
Saturation = 64
Hue = 0
Volume = 58880
Mute = 0
- output of lspci regarding hauppauge:
01:01.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Flags: bus master, medium devsel, latency 64, IRQ 66
Memory at dc000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
- output of mplayer /dev/video0
MPlayer 2:0.99+1.0pre8-0ubuntu8 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (Family: 6, Model:
15, Stepping: 6)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
startup scripts.
Opening joystick device /dev/input/js0
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
Playing /dev/video0.
Win32 LoadLibrary failed to load: avisynth.dll,
/usr/lib/win32/avisynth.dll, /usr/local/lib/win32/avisynth.dll
MPEG-PS file format detected.
VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 9600.0 kbps (1200.0 kbyte/s)
==========================================================================
Requested audio codec family [mp3] (afm=mp3lib) not available.
Enable it at compilation.
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, s16le, 384.0 kbit/25.00% (ratio: 48000->192000)
Selected audio codec: [ffmp2] afm: ffmpeg (FFmpeg MPEG layer-1 and
layer-2 audio decoder)
==========================================================================
open: No such file or directory
Couldn't open: /dev/mga_vid
open: No such file or directory
Couldn't open: /dev/mga_vid
[VO_TDFXFB] Can't open /dev/fb0: Permission denied.
[VO_3DFX] Unable to open /dev/3dfx.
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 576 (preferred colorspace: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try adding the scale filter, e.g. -vf spp,scale instead of -vf spp.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2))
==========================================================================
alsa-init: using device default
alsa: 48000 Hz/2 channels/4 bpf/32768 bytes buffer/Signed 16 bit Little
Endian
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 720x576 => 768x576 Planar YV12
No bind found for key 'c'. % 0% 1.4% 0 0
alsa-uninit: pcm closed 0.012 ct: -0.250 165/165 9% 0% 1.4% 0 0
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
