On Monday 04 December 2006 20:57, Bruce Bales wrote:
> I'm using kubuntu dapper drake with 2-6-15-27-386 kernal and a
> PVR350. mplayer /dev/video0 makes a screen with just dancing dots
> all over it and no audio.  I see some change when I do something
> like
> ivtv-tune -c 8 .
>
> One part of the response to ivtvctl -a shows:
>
>      Input   : 4
>         Name    : Tuner 0
>         Type    : 0x00000001
>         Audioset: 0x00000003
>         Tuner   : 0x00000000
>         Standard: 0x00000000000000FF ( PAL )
>         Status  : 0
> Makes me think it is set up for PAL (I'm in the U.S.)  But I don't
> know how to change this (or even if that's the problem.)
>
> No errors in dmesg and it says the card is initialized.
>
> I am dual booted and when I boot to Fedora 5, I get a good picture
> and sound, but I need it to work in Kubuntu.
>
> dmesg is below.  I sure would appreciate some idea what to try now.
> bruce

Solved!  Just answered my own question.  How to set ivtv to NTSC.  The 
answer is use ivtvctl -h to learn about some of the settings and then  
use      ivtvctl -u 0        which sets ivtv to NTSC.
Sorry to bother you.
bruce

>
> Dmesg |grep ivtv
> [17179591.640000] ivtv:  ==================== START INIT IVTV
> ====================
> [17179591.640000] ivtv:  version 0.4.7 (tagged release) loading
> [17179591.640000] ivtv:  Linux version: 2.6.15-26-386 preempt 486
> gcc-4.0
> [17179591.640000] ivtv:  In case of problems please include the
> debug info between
> [17179591.640000] ivtv:  the START INIT IVTV and END INIT IVTV
> lines, along with
> [17179591.640000] ivtv:  any module options, when mailing the
> ivtv-users mailinglist.
> [17179591.640000] ivtv0: Autodetected WinTV PVR 350 card (cx23415
> based)
> [17179591.720000] tveeprom: ivtv version
> [17179591.720000] ivtv0: i2c attach to card #0 ok [client=tveeprom,
> addr=50]
> [17179591.748000] tuner (ivtv): chip found at addr 0xc2 i2c-bus
> ivtv i2c driver #0
> [17179591.748000] ivtv0: i2c attach to card #0 ok [client=(tuner
> unset), addr=61]
> [17179591.928000] saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c
> driver #0)
> [17179592.056000] ivtv0: i2c attach to card #0 ok [client=saa7115,
> addr=21]
> [17179592.124000] saa7127 2-0044: ivtv driver
> [17179592.128000] saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c
> driver #0)
> [17179592.128000] ivtv0: i2c attach to card #0 ok [client=saa7127,
> addr=44]
> [17179592.224000] ivtv0: i2c attach to card #0 ok
> [client=MSP4448G-B3, addr=40]
> [17179592.264000] tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv
> i2c driver #0)
> [17179592.264000] ivtv0: i2c attach to card #0 ok [client=tda9887,
> addr=43]
> [17179592.952000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144
> bytes)
> [17179592.996000] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144
> bytes)
> [17179593.220000] ivtv0: Encoder revision: 0x02050032
> [17179593.228000] ivtv0: Decoder revision: 0x02020023
> [17179593.228000] ivtv0: Allocate DMA encoder MPEG stream: 128 x
> 32768 buffers (4096KB total)
> [17179593.228000] ivtv0: Allocate DMA encoder YUV stream: 161 x
> 12960 buffers (2048KB total)
> [17179593.228000] ivtv0: Allocate DMA encoder VBI stream: 80 x
> 26208 buffers (2048KB total)
> [17179593.228000] ivtv0: Allocate DMA encoder PCM audio stream: 455
> x 4608 buffers (2048KB total)
> [17179593.228000] ivtv0: Create encoder radio stream
> [17179593.228000] ivtv0: Allocate DMA decoder MPEG stream: 16 x
> 65536 buffers (1024KB total)
> [17179593.228000] ivtv0: Allocate DMA decoder VBI stream: 512 x
> 2048 buffers (1024KB total)
> [17179593.228000] ivtv0: Create decoder VOUT stream
> [17179593.228000] ivtv0: Allocate DMA decoder YUV stream: 20 x
> 51840 buffers (1024KB total)
> [17179593.280000] ivtv0: loaded v4l-cx2341x-init.mpg firmware
> (155648 bytes)
> [17179593.388000] tuner: type set to 47 (LG NTSC (TAPE series)) by
> ivtv i2c driver #0
> [17179593.556000] ivtv0: Initialized WinTV PVR 350, card #0
> [17179593.564000] ivtv:  ====================  END INIT IVTV
> ====================
> [17179594.240000] ivtv0: i2c attach to card #0 ok [client=i2c IR
> (Hauppauge), addr=18]
> [17179594.328000] ivtv0-osd: Framebuffer module loaded (attached to
> ivtv card id 0)
> [17179594.376000] ivtv0-osd: screen coords: [0 0] -> [720 576]
> [17179594.384000] ivtv0-osd: original global alpha = 208
> [17179594.400000] ivtv0-osd: current OSD state = 39
> [17179594.424000] ivtv0-osd: new global alpha = 208 (1 255 0)
> [17179594.432000] ivtv0-osd: framebuffer at 0xf9510000, mapped to
> 0xf1890000, size 1665k
> [17179594.432000] ivtv0-osd: mode is 720x576x32, linelength=2880
> [17179594.564000] ivtv0-osd: fb1: cx23415 TV out frame buffer
> device [17179594.564000] ivtv0: Allocate DMA decoder OSD stream: 16
> x 65536 buffers (1024KB total)
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to