Hi
thanks for the suggestion.
I forced it with modprobe -f ivtv
Get -> Segmentation fault
I have no module options set
dmesg output:
ivtv: no version magic, tainting kernel.
ivtv: module not supported by Novell, setting U taint flag.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.5 (tagged release) loading
ivtv: Linux version: 2.6.16.21-0.25-default gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI 16 (level, low)
-> IRQ 74
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 6-0050: Hauppauge model 25019, rev C389, serial# 9847658
tveeprom 6-0050: tuner model is TCL MFPE05 2 (idx 89, type 38)
tveeprom 6-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
(eeprom 0x74)
tveeprom 6-0050: audio processor is CX25843 (idx 37)
tveeprom 6-0050: decoder processor is CX25843 (idx 30)
tveeprom 6-0050: has radio, has no IR remote
tuner: module not supported by Novell, setting U taint flag.
tuner 6-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 6-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 6-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840: module not supported by Novell, setting U taint flag.
cx25840 6-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 6-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775: module not supported by Novell, setting U taint flag.
wm8775 6-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
general protection fault: 0000 [1]
last sysfs file: /class/firmware/0000:04:08.0/loading
CPU 0
Modules linked in: wm8775 cx25840 tda9887 tuner ivtv snd_rtctimer
snd_seq_dummy snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device ipv6
af_packet edd lirc_imon lirc_dev button battery ac apparmor aamatch_pcre
xfs_quota xfs exportfs ext3 jbd loop dm_mod dvb_usb_dib0700 dib7000m
dvb_usb dvb_core dvb_pll dib3000mc dibx000_common mt2060 zd1211 nvidia
floppy ohci1394 ieee1394 snd_hda_intel ohci_hcd firmware_class i2c_algo_bit
tveeprom i2c_core videodev v4l1_compat v4l2_common snd_hda_codec forcedeth
ide_cd uhci_hcd ehci_hcd usbcore snd_pcm snd_timer snd soundcore
snd_page_alloc cdrom parport_pc lp parport reiserfs fan thermal processor
sg sata_nv libata amd74xx sd_mod scsi_mod ide_disk ide_core
Pid: 5402, comm: modprobe Tainted: PF U 2.6.16.21-0.25-default #1
RIP: 0010:[<ffffffff801c8e58>] <ffffffff801c8e58>{kref_get+1}
RSP: 0018:ffff81000f859ba8 EFLAGS: 00010206
RAX: ffff810017dac280 RBX: 6e65203076747739 RCX: 0000000000000007
RDX: ffff810017dac287 RSI: ffffffff802e1454 RDI: 6e65203076747755
RBP: 00000000fffffff4 R08: 0000000000000000 R09: ffff81000e68b9c0
R10: ffffffff881ab9f0 R11: ffff810032b81788 R12: ffffffff802e144d
R13: ffff810032b81788 R14: ffff81000e68bb28 R15: 6e65203076747739
FS: 00002b2ff60986d0(0000) GS:ffffffff803f7000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000000050f4d8 CR3: 000000000a638000 CR4: 00000000000006e0
Process modprobe (pid: 5402, threadinfo ffff81000f858000, task
ffff810018def100)
Stack: 6e65203076747739 ffffffff801c83ce ffff810017dacfe0 ffffffff8019d315
ffffffff881ab9c0 0000000000000000 ffff81001c3bbf08 ffffffff881ab9c0
ffff810017dacc20 0000000000000000
Call Trace: <ffffffff801c83ce>{kobject_get+18}
<ffffffff8019d315>{sysfs_create_link+180}
<ffffffff80231c12>{class_device_add+504}
<ffffffff881a62b1>{:videodev:video_register_device+393}
<ffffffff8892ee04>{:ivtv:ivtv_reg_dev+230}
<ffffffff8892f0c1>{:ivtv:ivtv_streams_setup+557}
<ffffffff88929e7a>{:ivtv:ivtv_probe+5436}
<ffffffff801d47e5>{pci_device_probe+76}
<ffffffff80230e98>{driver_probe_device+82}
<ffffffff80230fbd>{__driver_attach+107}
<ffffffff80230f52>{__driver_attach+0}
<ffffffff802308bf>{bus_for_each_dev+67}
<ffffffff8023052f>{bus_add_driver+126}
<ffffffff801d4980>{__pci_register_driver+110}
<ffffffff889286d3>{:ivtv:module_start+234}
<ffffffff8013c008>{sys_init_module+4819}
<ffffffff8010a3ae>{system_call+126}
Code: 8b 07 48 89 fb 85 c0 75 24 b9 20 00 00 00 48 c7 c2 6c 59 2d
RIP <ffffffff801c8e58>{kref_get+1} RSP <ffff81000f859ba8>
Kind regards, Andre
"Do, or do not, there is no try!" - Yoda
Andreas von Roznowski
SOA Engagement Manager
EIS = SOA Advanced Technologies
IBM Software Group
IBM Australia
( 13 24 26
( 61-3-9626-6724 (direct)
61-3-9626-6621 (fax)
È 61-412-251-949 (mobile)
+ [EMAIL PROTECTED]
visit our sites:
EIS external
EIS internal
Sander Sweers
<[EMAIL PROTECTED]
ail.com> To
Sent by: User discussion about IVTV
ivtv-users-bounce <[email protected]>
[EMAIL PROTECTED] cc
Subject
13/12/2006 01:00 Re: [ivtv-users] Fw: Problem
loading ivtv 0.65 with SuSE 10.1
and PVR-150
Please respond to
User discussion
about IVTV
<[EMAIL PROTECTED]
river.org>
Andre von Roznowski wrote:
> resubmitted as directed by moderator
>
> Have problem with SuSE 10.1 and ivtv 0.65. Kernel is
> 2.6.16.21-0.25-default.
>
> HW is x86_64 AMD Sempron.
> ASUS M2NPV-VM Motherboard.
> Have a Hauppauge Nova-T 500 DVB-T dual-tuner card, which has been working
> fine.
> Recently added PVR-150 MCE card, as I have two channels beyond the
digital
> cliff, but analog is ok.
>
> lspci extract
> 04:08.0 Multimedia video controller: Internext Compression Inc iTVC16
> (CX23416) MPEG-2 Encoder (rev 01)
> Subsystem: Hauppauge computer works Inc. WinTV PVR 150
> Flags: bus master, medium devsel, latency 32, IRQ 255
> Memory at f4000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [44] Power Management version 2
>
>
> Installation steps:
>
> removed ivtv rpm 0.7 using yast as per SuSE howto
> downloaded and installed 0.65 as per instructions
> make clean && make && make install - no errors
> depmod
> modprobe ivtv
>
> I get the following error: Error inserting ivtv
> (/lib/modules/2.6.16.21-0.25-default/ivtv/ivtv.ko): Unknown symbol in
> module, or unknown parameter (see dmesg)
You can probably force it with modprobe -f
>
> dmesg states:
>
> ivtv: module not supported by Novell, setting U taint flag.
> ivtv: disagrees about version of symbol video_unregister_device
> ivtv: Unknown symbol video_unregister_device
> ivtv: disagrees about version of symbol video_device_alloc
> ivtv: Unknown symbol video_device_alloc
> ivtv: disagrees about version of symbol video_register_device
> ivtv: Unknown symbol video_register_device
> ivtv: disagrees about version of symbol video_device_release
> ivtv: Unknown symbol video_device_release
This happens when the ivtv module is not build against the same version
kernel you are running. Make sure that it builds against the kernel
version you are running. Optionally you can set where ivtv looks for the
kernel source by using KDIR=/path/to/kernel_source. Example:
KDIR=/path/to/kernel_source make
KDIR=/path/to/kernel_source make install
>
>
> I googled, read through the howto, troubleshooting, README,
README.install.
> No luck.
>
> Any help would be much appreciated.
>
Greets
Sander
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
