Does anyone want to help me reflash my TVeeprom? Is the TVEeeprom used to make assumptions about the card model and region used in mythtv code?
Is it easy to change a tuner? It's only got a few pins, I could just check the datasheets, and use another tuner to work with mythtv. I did have it working for a few hours using the SVHS input. It's just now it's gone out to lunch and I'm trying to find out why. I am working on a LIRC project to make an external tuner using my DVD recorder. I haven't even bothered to test the tuner.. unless anyone knows a PAL tuner is capable of working. Rudy: What your saying is that there are design deficiencies with the PVR hardware to prevent NTSC devices playing PAL signals? Cheers, Luke On 27/12/06, Rudy Zijlstra <[EMAIL PROTECTED]> wrote: > Luke McKee wrote: > > >Hello all, > > > > > > > >I have a PVR-350 NTSC version and I'm in a PAL country. I have > >over-rided the standard with PAL=M, and in full debug it seems to be > >putting the card in PAL mode. I also use v4l2-control to do this.The > >MSP44xx seems to support pal audio even though it is not listed in the > >module options. > > > > > I have some strong doubts on whether you can get this to work in a > stable way. Not because of any limitation on the main chipset (cx, > msp,..) but because of the tuner. > > NTSC is a 6MHz bandwidth. PAL is either 7 or 8MHz. This means that when > you use an NTSC tuner in PAL country, you will not capture all the > signal. Especially on an 8MHz PAL signal you will loose way too much > information. On a 7MHz you may get lucky and capture enough of the > signal to get image / sound. I suspect though, that you will most often > loose out on audio. I suspect the tuner will lock on the video carrier, > and the audio carrier will at least partly be outside the SAW filter of > the tuner. On an 8MHz PAL this will certainly be the case. > > Using SVHS will work around this problem. What i do not know, is whether > the only difference between NTSC / PAL version is the tuner, or whether > the routing on the card is also different. Hans may know this, having > gone through the code in detail on this. > > A different problem you can run into, is that the firmware of the card > may be making some assumptions. Like that when the tuner is an NTSC, > then certain combinations are "unexpected" and thus not supported in the > firmware. This is not so much a concious "not supported" as well as "not > foreseen to be used". The latest can lead to some very dificult to debug > problems. > > Good luck! (i suspect buying a PAL version will safe you a lot of time > and effort). > > > Rudy > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
