Hi, Sometimes when I play "cat /dev/video | mplayer -" I get mplayer errors.
Win32 LoadLibrary failed to load: avisynth.dll, /usr/local/lib/codecs/avisynth.dll, /usr/lib/win32/avisynth.dll, /usr/local/lib/win32/avisynth.dll What command should I use so it plays every time. My dmesg output shows: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.0 (tagged release) loading ivtv: Linux version: 2.6.18.1 mod_unload 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) PCI: Enabling device 0000:01:06.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 225 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) tveeprom 2-0050: The eeprom says no radio is present, but the tuner type tveeprom 2-0050: indicates otherwise. I will assume that radio is present. tveeprom 2-0050: Hauppauge model 25012, rev B168, serial# 8319894 tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote ivtv0: Encoder revision: 0x02050032 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio ivtv0: Registered device radio0 for encoder radio tuner 2-0061: type set to 47 (LG NTSC (TAPE series)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
