I think the output of the 350, Left and Right RCA Males will be needed to be plugged into the sound (on board or PCI card) input. Try the Line input and see if any audio shows. If that doesn't work, then while a show is running or a recorded show is playing, open another console and run the command alsamixer. Play with the settings until audio is heard. I had to run the 350 line out into my Mic input for it to work.
Good luck. Chris Costa wrote: > > Isn't this a cabling problem? Don't you need to plug the jack from > the cable > > into the PVR-350 audio input? > > I use the 4th and 5th plugs in http://img.ncix.com/gif/10271.JPG - > counting from the left. > > Thanks for the reply - Interesting idea, I have found the supplied > cable (no small feat after 2 years), and hooked up the rca inputs to a > rca->stereo jack. However no still no sound :( I have done some > querying of the v4l2-ctl and have found the following for: > --get-audio-input: 0 (tuner 1) > --get-audio-output: 1 (A/V Audio Out) > > Seems ok, or is there something wrong with the settings? > > Thanks, > Chris > >------------------------------------------------------------------------ > >_______________________________________________ >ivtv-users mailing list >[email protected] >http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
