I have been running mythtv with two PVR-150's for a long time. I'm trying to add an HVR-950 to my system. I compiled and installed v4l-dvb and now after rebooting, I can't change channels. Running Fedora Core 5. Myth is SVN current. If I can get this working, I'm all set. Thanks in advance for any help you can offer. I did notice (see the very bottom of this email) that I don't have the latest v4l-kmdl installed.... I'm wondering if installing that will help or hurt me at this point. Thanks! -Adam
-------------Background Information-------------- [EMAIL PROTECTED] ~]$ dmesg |grep ivtv ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.2 (tagged release) loading ivtv: Linux version: 2.6.18-1.2257.fc5 mod_unload 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Autodetected Hauppauge WinTV PVR-150 ivtv0: reopen i2c bus for IR-blaster support tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Encoder revision: 0x02050032 ivtv0: Registered device video3 for encoder MPEG ivtv0: Registered device video35 for encoder YUV ivtv0: Registered device vbi3 for encoder VBI ivtv0: Registered device video27 for encoder PCM audio ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge card (cx23416 based) ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: Autodetected Hauppauge WinTV PVR-150 ivtv1: Encoder revision: 0x02050032 ivtv1: Registered device video4 for encoder MPEG ivtv1: Registered device video36 for encoder YUV ivtv1: Registered device vbi4 for encoder VBI ivtv1: Registered device video28 for encoder PCM audio ivtv1: Registered device radio4 for encoder radio ivtv1: Initialized Hauppauge WinTV PVR-150, card #1 ivtv: ==================== END INIT IVTV ==================== ************************************************************** [EMAIL PROTECTED] ~]$ dmesg |grep tuner tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) tveeprom 2-0050: tuner model is TCL MFNM05-4 (idx 103, type 43) tveeprom 3-0050: tuner model is Xceive XC3028 (idx 120, type 71) tuner 3-0061: chip found @ 0xc2 (em28xx #0) Tuner: setting up tuner core extension for: Xceive 3028 Tuner ************************************************************** [EMAIL PROTECTED] ~]$ dmesg |grep em28 em28xx v4l2 driver version 0.0.1 loaded em28xx new video device (2040:6513): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 13 65 d0 12 5c 03 82 1e 6a 18 em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 01 01 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 em28xx #0: i2c eeprom 70: 32 00 37 00 35 00 39 00 37 00 32 00 36 00 32 00 em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 38 00 30 00 00 00 em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85 em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 ce 41 em28xx #0: i2c eeprom c0: 10 f0 74 02 01 00 01 79 87 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85 em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 ce 41 em28xx #0: i2c eeprom f0: 10 f0 74 02 01 00 01 79 87 00 00 00 00 00 00 00 tuner 3-0061: chip found @ 0xc2 (em28xx #0) em28xx-video.c: requesting em28xx-audio! em28xx-video.c: requesting em2880-dvb! em28xx #0: V4L2 device registered as /dev/video0 em28xx #0: Found Hauppauge WinTV HVR 950 usbcore: registered new driver em28xx ************************************************************** [EMAIL PROTECTED] ~]# rpm -qa |grep ivtv ivtv-0.8.2-123.fc5.at ivtv-kmdl-2.6.18-1.2257.fc5-0.8.2-123.fc5.at perl-Video-ivtv-0.13-8.fc5.at ivtv-kmdl-2.6.18-1.2239.fc5-0.8.2-123.fc5.at ivtv-firmware-1.8a-10.at ************************************************************** [EMAIL PROTECTED] ~]# rpm -qa |grep video video4linux-kmdl-2.6.18-1.2239.fc5-20061107-77.fc5.at video4linux-20061107-77.fc5.at videolan-client-0.8.5-2.fc5
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
