try a distro-on-a-CD -- i was able to download, build,
and run ivtv under Knoppix in about 15min.

that way at least you'll have something to compare to
on the same system.  (plus, having a bootable CD is often
useful to have around)

--Rob



On Tue, Jan 30, 2007 at 02:37:18AM -0000, Linux TV homemaillist wrote:
> Can anyone suggest any course of action on this, other than doing a fresh
> OS rebuild????
> 
> I've tried sending kernel messages to a log file, and then after the cold
> start checking.  But nothing gets written
> 
> As soon as I do a 'cat /dev/video0', the console responds for about 2
> seconds and then the machine locks - cold reboot the only fix.
> 
> help!!!!
> 
> 
> > Hi.
> >
> > I was running :
> > ivtv:  version 0.9.0 (development revision 3574) loading
> > ivtv:  Linux version: 2.6.18-1.2239.fc5 mod_unload 686 REGPARM 4KSTACKS
> > gcc-4.1
> >
> > on another machine with my new PVR-500 for weeks, while I soak tested
> > rebooting over and over with no problems.
> >
> > I've now removed the old PVR-150 from my production machine and installed
> > the new PVR-500.  The card loads fine everytime, but as soon as I do a
> > "dd" or "cat /dev/video" or "cat /dev/video1" or run VDR, the machine
> > completely locks up.  No logs, no errors, just a 100% lockup - needing a
> > 20 second hold on my power button.
> >
> > Any ideas?????
> >
> >
> >
> > ivtv:  ==================== START INIT IVTV ====================
> > ivtv:  version 0.9.0 (development revision 3574) loading
> > ivtv:  Linux version: 2.6.18-1.2239.fc5 mod_unload 686 REGPARM 4KSTACKS
> > gcc-4.1
> > ivtv:  In case of problems please include the debug info between
> > ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
> > ivtv:  any module options, when mailing the ivtv-users mailinglist.
> > ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low)
> > -> IRQ 185
> > PCI: VIA IRQ fixup for 0000:00:10.4, from 10 to 9
> > ehci_hcd 0000:00:10.4: EHCI Host Controller
> > ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
> > ehci_hcd 0000:00:10.4: irq 185, io mem 0xee002000
> > ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> > usb usb5: configuration #1 chosen from 1 choice
> > hub 5-0:1.0: USB hub found
> > hub 5-0:1.0: 8 ports detected
> > ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 201
> > ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[201]
> > MMIO=[ee001000-ee0017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
> > ivtv0: Autodetected Hauppauge card (cx23416 based)
> > ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 209
> > ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > ivtv0: Encoder revision: 0x02050032
> > tveeprom 1-0050: Hauppauge model 23559, rev D596, serial# 8859942
> > tveeprom 1-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73)
> > tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
> > (eeprom 0x74)
> > tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx
> > 101, type 62)
> > tveeprom 1-0050: audio processor is CX25843 (idx 37)
> > tveeprom 1-0050: decoder processor is CX25843 (idx 30)
> > tveeprom 1-0050: has radio, has no IR remote
> > ivtv0: Autodetected WinTV PVR 500 (unit #1)
> > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
> > tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
> > tuner 1-0060: TEA5767 detected.
> > tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> > tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
> > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> > ACPI: Unable to turn cooling device [c185fdc4] 'on'
> > ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000000301b201263]
> > cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> > ivtv0: Registered device video0 for encoder MPEG (4 MB)
> > ivtv0: Registered device video32 for encoder YUV (2 MB)
> > ivtv0: Registered device vbi0 for encoder VBI (1 MB)
> > ivtv0: Registered device video24 for encoder PCM audio (1 MB)
> > ivtv0: Registered device radio0 for encoder radio
> > tuner 1-0061: type set to 73 (Samsung TCPG 6121P30A)
> > ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> > ivtv:  ======================  NEXT CARD  ======================
> > ivtv1: Autodetected Hauppauge card (cx23416 based)
> > ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 177
> > ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
> > ACPI: Unable to turn cooling device [c185fdc4] 'on'
> > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > ivtv1: Encoder revision: 0x02050032
> > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
> > tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
> > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
> > cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
> > cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
> > tveeprom 2-0050: Hauppauge model 23559, rev D596, serial# 8859942
> > tveeprom 2-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73)
> > tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
> > (eeprom 0x74)
> > tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx
> > 101, type 62)
> > tveeprom 2-0050: audio processor is CX25843 (idx 37)
> > tveeprom 2-0050: decoder processor is CX25843 (idx 30)
> > tveeprom 2-0050: has radio, has no IR remote
> > ivtv1: Correcting tveeprom data: no radio present on second unit
> > ivtv1: Autodetected WinTV PVR 500 (unit #2)
> > ivtv1: Registered device video1 for encoder MPEG (4 MB)
> > ivtv1: Registered device video33 for encoder YUV (2 MB)
> > ivtv1: Registered device vbi1 for encoder VBI (1 MB)
> > ivtv1: Registered device video25 for encoder PCM audio (1 MB)
> > tuner 2-0061: type set to 73 (Samsung TCPG 6121P30A)
> > ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
> > ivtv:  ====================  END INIT IVTV  ====================
> >
> >
> >
> >
> >
> > I've also tried the stable release, with the same problem:
> >
> >
> > Linux video capture interface: v2.00
> > ivtv:  ==================== START INIT IVTV ====================
> > ivtv:  version 0.8.2 (tagged release) loading
> > ivtv:  Linux version: 2.6.18-1.2239.fc5 mod_unload 686 REGPARM 4KSTACKS
> > gcc-4.1
> > ivtv:  In case of problems please include the debug info between
> > ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
> > ivtv:  any module options, when mailing the ivtv-users mailinglist.
> > ivtv0: Autodetected Hauppauge card (cx23416 based)
> > ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 209
> > ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > tveeprom 1-0050: Hauppauge model 23559, rev D596, serial# 8859942
> > tveeprom 1-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73)
> > tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
> > (eeprom 0x74)
> > tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx
> > 101, type 62)
> > tveeprom 1-0050: audio processor is CX25843 (idx 37)
> > tveeprom 1-0050: decoder processor is CX25843 (idx 30)
> > tveeprom 1-0050: has radio, has no IR remote
> > ivtv0: Autodetected WinTV PVR 500 (unit #1)
> > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
> > tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
> > tuner 1-0060: TEA5767 detected.
> > tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> > tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
> > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> > cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> > ivtv0: Encoder revision: 0x02050032
> > ivtv0: Registered device video0 for encoder MPEG
> > ivtv0: Registered device video32 for encoder YUV
> > ivtv0: Registered device vbi0 for encoder VBI
> > ivtv0: Registered device video24 for encoder PCM audio
> > ivtv0: Registered device radio0 for encoder radio
> > tuner 1-0061: type set to 73 (Samsung TCPG 6121P30A)
> > ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> > ivtv:  ======================  NEXT CARD  ======================
> > ivtv1: Autodetected Hauppauge card (cx23416 based)
> > ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 177
> > ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
> > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
> > tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
> > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
> > cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
> > cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
> > tveeprom 2-0050: Hauppauge model 23559, rev D596, serial# 8859942
> > tveeprom 2-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73)
> > tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
> > (eeprom 0x74)
> > tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx
> > 101, type 62)
> > tveeprom 2-0050: audio processor is CX25843 (idx 37)
> > tveeprom 2-0050: decoder processor is CX25843 (idx 30)
> > tveeprom 2-0050: has radio, has no IR remote
> > ivtv1: Correcting tveeprom data: no radio present on second unit
> > ivtv1: Autodetected WinTV PVR 500 (unit #2)
> > ivtv1: Encoder revision: 0x02050032
> > ivtv1: Registered device video1 for encoder MPEG
> > ivtv1: Registered device video33 for encoder YUV
> > ivtv1: Registered device vbi1 for encoder VBI
> > ivtv1: Registered device video25 for encoder PCM audio
> > tuner 2-0061: type set to 73 (Samsung TCPG 6121P30A)
> > ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
> > ivtv:  ====================  END INIT IVTV  ====================

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to