> Rudy Zijlstra writes: > >> Linux TV homemaillist wrote: >>> Can anyone suggest any course of action on this, other than doing a >>> fresh >>> OS rebuild???? >>> >>> I've tried sending kernel messages to a log file, and then after the >>> cold >>> start checking. But nothing gets written >>> >>> As soon as I do a 'cat /dev/video0', the console responds for about 2 >>> seconds and then the machine locks - cold reboot the only fix. >>> >>> help!!!!
> I have had a similar problem with all the current releases of the ivtv > driver/kernels(I have had it working with an old release of ivtv and a > 2.6.15 kernel) > > My issue was resolved by using a svn checkout of the ivtv driver > > Regards > Hasse I have now upgraded my kernel and sources, and checked out/installed the svn version 0.8.2 - I still get the same problem. 2 seconds after doing a 'cat /dev/video0' (or anything else accessing the card) and the machine locks up (cold boot). Linux video capture interface: v2.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.2 (tagged release) loading ivtv: Linux version: 2.6.18-1.2257.fc5 mod_unload 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 217 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tveeprom 1-0050: Hauppauge model 23559, rev D596, serial# 8859942 tveeprom 1-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote ivtv0: Autodetected WinTV PVR 500 (unit #1) tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0060: TEA5767 detected. tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Encoder revision: 0x02050032 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio ivtv0: Registered device radio0 for encoder radio tuner 1-0061: type set to 73 (Samsung TCPG 6121P30A) ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 177 ivtv1: Unreasonably low latency timer, setting to 64 (was 32) ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) tveeprom 2-0050: Hauppauge model 23559, rev D596, serial# 8859942 tveeprom 2-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: Autodetected WinTV PVR 500 (unit #2) ivtv1: Encoder revision: 0x02050032 ivtv1: Registered device video1 for encoder MPEG ivtv1: Registered device video33 for encoder YUV ivtv1: Registered device vbi1 for encoder VBI ivtv1: Registered device video25 for encoder PCM audio tuner 2-0061: type set to 73 (Samsung TCPG 6121P30A) ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
