Michael Cree writes:
On 2/02/2007, at 1:56 PM, Sam Varshavchik wrote:Boleslaw Ciesielski writes:Sam Varshavchik wrote:The problem I have is with the ivtv_fb.ko module. It loads without any errors, but TV-Out remains a blue screen in 0.9;Forgive me if it's already been covered, but are you sure that you don't have the missing saa7127 problem?That's the next thing I'm going to look into.Looking back at the IVTV log you gave in your earlier post I didn't see saa7127 listed. Anyway, an easy way to check is to run the lsmod command (after loading ivtv) and check that saa7127 is listed. Or you could enter "dmesg | grep saa7127" and see if any lines pop up listing saa7127 loaded or reporting errors.
Well, if I do not have an saa7127 module, I wouldn't expect it to appear in lsmod's output, would I?
No, there are no references in dmesg, or /var/log/messages, to saa7127, which is why I doubt that it's my problem. But I'll try building this module anyway, no harm in doing so.
It sure would be helpful to compare notes with someone who's running a PVR350 on FC6 (2.6.19 kernel errata), _AND_ >>IMPORTANT<< using Ian Campbell's Debian patch to ivtv_xdriver for modular Xorg, to successfully get X running on 350's framebuffer. 0.9.1 drives the mpeg encoder on my PVR350 just fine, I only can't get TV-Out working, like I could with 0.8 on FC4.
pgpweFA1djoLu.pgp
Description: PGP signature
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
