Rod wrote: > Greetings, > > Everything has been great with MythTv and ivtv until I recently did a > software update in Fedora Core 6. TvOut no longer seems to be working > on my PVR-350 > > Any ideas on how to get TvOut working again would be greatly > appreciated. > > Things in dmesg look OK on bootup
But there is one module missing, the saa7127 module. You need to follow the instructions on [1] and it should start working again. Greets Sander [1] http://www.gossamer-threads.com/lists/ivtv/users/34248?search_string=saa7127;#34248 > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.9.1 (tagged release) loading > ivtv: Linux version: 2.6.19-1.2895.fc6 SMP mod_unload 686 REGPARM > 4KSTACKS > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge card (cx23415 based) > PCI: Enabling device 0000:01:01.0 (0014 -> 0016) > ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKC] -> GSI 10 (level, > low) -> IRQ > 10 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a National Semiconductor PC87306 > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > tveeprom 3-0050: The eeprom says no radio is present, but the tuner type > tveeprom 3-0050: indicates otherwise. I will assume that radio is > present. > tveeprom 3-0050: Hauppauge model 48132, rev K268, serial# 8207794 > tveeprom 3-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) > tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 3-0050: audio processor is MSP4448 (idx 27) > tveeprom 3-0050: decoder processor is SAA7115 (idx 19) > tveeprom 3-0050: has radio, has IR remote > ivtv0: Autodetected Hauppauge WinTV PVR-350 > tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #0) > tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0) > saa7115 3-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver > #0) > msp3400 3-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) > msp3400 3-0040: MSP4448G-A2 supports radio, mode is autodetect and > autoselect > i2c_adapter i2c-3: Client creation failed at 0x44 (-1) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Decoder revision: 0x02020023 > ivtv0: Registered device video0 for encoder MPEG > ivtv0: Registered device video32 for encoder YUV > ivtv0: Registered device vbi0 for encoder VBI > ivtv0: Registered device video24 for encoder PCM audio > ivtv0: Registered device radio0 for encoder radio > ivtv0: Registered device video16 for decoder MPEG > ivtv0: Registered device vbi8 for decoder VBI > ivtv0: Registered device vbi16 for decoder VOUT > ivtv0: Registered device video48 for decoder YUV > ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > tuner 3-0061: type set to 47 (LG NTSC (TAPE series)) > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > ivtv: ==================== END INIT IVTV ==================== > > although there are some warnings concerning framebuffer in the dmesg > output > > ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) > ivtv0-osd: screen coords: [0 0] -> [720 480] > ivtv0-osd: original global alpha = 208 > ivtv0-osd: current OSD state = 39 > ivtv0-osd: new global alpha = 208 (1 255 0) > ivtv0-osd: framebuffer at 0xf1510000, mapped to 0xe1890000, size 1665k > ivtv0-osd: mode is 720x480x32, linelength=2880 > ivtv0-osd warning: ivtvfb_set_par > Console: switching to colour frame buffer device 90x30 > ivtv0-osd: fb0: cx23415 TV out frame buffer device > > and > > ivtv0-osd warning: ivtvfb_check_var > ivtv0-osd warning: ivtvfb_check_var > ivtv0-osd warning: ivtvfb_set_par > > and > > ivtv0-osd warning: ivtvfb_check_var > ivtv0-osd warning: ivtvfb_set_par > ivtv0-osd warning: ivtvfb_check_var > ivtv0-osd warning: ivtvfb_set_par > ivtv0-osd warning: ivtvfb_check_var > ivtv0-osd warning: ivtvfb_check_var > ivtv0-osd warning: ivtvfb_set_par > > The above are the last enties out of dmesg. > > I've set up X to output to Svideo but am getting the following error in > the Xorg.log > > I) Setting vga for screen 0. > (EE) IVTVDEV_TST(0)Framebuffer id from dev /dev/fb0is 0 > (EE) IVTVDEV_TST(0)open /dev/video48 returned 7 > (EE) IVTVDEV_TST(0)get_fb returned 0 fbid 0 > (**) IVTVDEV_TST(0)Depth 24, (**) framebuffer bpp 32 > (==) IVTVDEV_TST(0)RGB weight 888 > (==) IVTVDEV_TST(0)Default visual is TrueColor > (==) IVTVDEV_TST(0)Using gamma correction (1.0, 1.0, 1.0) > (II) IVTVDEV_TST(0)Hardware: cx23415 TV out (vidmem: 1665k) > (**) IVTVDEV_TST(0)Option "ivtv" "/dev/fb0" > (II) IVTVDEV_TST(0)Checking Modes against framebuffer device... > (II) IVTVDEV_TST(0) mode "720x480" ok > (II) IVTVDEV_TST(0)Checking Modes against monitor... > (--) IVTVDEV_TST(0)Virtual size is 720x480 (pitch 720) > > Thanks in advance. > > > > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
