Greetings, Everything has been great with MythTv and ivtv until I recently did a software update in Fedora Core 6. TvOut no longer seems to be working on my PVR-350
Any ideas on how to get TvOut working again would be greatly appreciated. Things in dmesg look OK on bootup ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.9.1 (tagged release) loading ivtv: Linux version: 2.6.19-1.2895.fc6 SMP mod_unload 686 REGPARM 4KSTACKS ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23415 based) PCI: Enabling device 0000:01:01.0 (0014 -> 0016) ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) tveeprom 3-0050: The eeprom says no radio is present, but the tuner type tveeprom 3-0050: indicates otherwise. I will assume that radio is present. tveeprom 3-0050: Hauppauge model 48132, rev K268, serial# 8207794 tveeprom 3-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 3-0050: audio processor is MSP4448 (idx 27) tveeprom 3-0050: decoder processor is SAA7115 (idx 19) tveeprom 3-0050: has radio, has IR remote ivtv0: Autodetected Hauppauge WinTV PVR-350 tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 3-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) msp3400 3-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) msp3400 3-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect i2c_adapter i2c-3: Client creation failed at 0x44 (-1) ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG ivtv0: Registered device vbi8 for decoder VBI ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 3-0061: type set to 47 (LG NTSC (TAPE series)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== although there are some warnings concerning framebuffer in the dmesg output ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv0-osd: screen coords: [0 0] -> [720 480] ivtv0-osd: original global alpha = 208 ivtv0-osd: current OSD state = 39 ivtv0-osd: new global alpha = 208 (1 255 0) ivtv0-osd: framebuffer at 0xf1510000, mapped to 0xe1890000, size 1665k ivtv0-osd: mode is 720x480x32, linelength=2880 ivtv0-osd warning: ivtvfb_set_par Console: switching to colour frame buffer device 90x30 ivtv0-osd: fb0: cx23415 TV out frame buffer device and ivtv0-osd warning: ivtvfb_check_var ivtv0-osd warning: ivtvfb_check_var ivtv0-osd warning: ivtvfb_set_par and ivtv0-osd warning: ivtvfb_check_var ivtv0-osd warning: ivtvfb_set_par ivtv0-osd warning: ivtvfb_check_var ivtv0-osd warning: ivtvfb_set_par ivtv0-osd warning: ivtvfb_check_var ivtv0-osd warning: ivtvfb_check_var ivtv0-osd warning: ivtvfb_set_par The above are the last enties out of dmesg. I've set up X to output to Svideo but am getting the following error in the Xorg.log I) Setting vga for screen 0. (EE) IVTVDEV_TST(0)Framebuffer id from dev /dev/fb0is 0 (EE) IVTVDEV_TST(0)open /dev/video48 returned 7 (EE) IVTVDEV_TST(0)get_fb returned 0 fbid 0 (**) IVTVDEV_TST(0)Depth 24, (**) framebuffer bpp 32 (==) IVTVDEV_TST(0)RGB weight 888 (==) IVTVDEV_TST(0)Default visual is TrueColor (==) IVTVDEV_TST(0)Using gamma correction (1.0, 1.0, 1.0) (II) IVTVDEV_TST(0)Hardware: cx23415 TV out (vidmem: 1665k) (**) IVTVDEV_TST(0)Option "ivtv" "/dev/fb0" (II) IVTVDEV_TST(0)Checking Modes against framebuffer device... (II) IVTVDEV_TST(0) mode "720x480" ok (II) IVTVDEV_TST(0)Checking Modes against monitor... (--) IVTVDEV_TST(0)Virtual size is 720x480 (pitch 720) Thanks in advance. _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
