> > Roger James wrote: > > > > I have recently upgraded from the 0.6 source to the 0.9 source and I > > seem to have acquired some severe ghosting on capture from the > > composite 1 input. This has me baffled as I would expect ghosting to > > be an analogue side issue. But if I revert to the old kernel 2.6.16.17 > > kernel and the 0.6 driver it goes away. Anyone got any ideas on this. > > > > > > > > Roger > > > > > Are you recording on any other size than max size for either NTSC or > PAL? Scaling has that effect in recent versions of ivtv. >
Rudy, Any suggestions on how I might check this. I am using Mythtv 0.20 and I haven't played with the capture card settings for a couple of years! Looking through the mythtv settings table in MySql I can see a few TVVidModeResolutionN paramters set to 640x480 but I suspect they are to do with the TV-Out side which I am not using on the PVR350 (PAL). Just glancing through the list I can only see a reference to scaling to being a problem with non saa7115 (my 350 is a saa7115) cards and VBI captures. Have I missed something? Roger _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
