Roger James wrote: > >> Roger James wrote: >> >>> I have recently upgraded from the 0.6 source to the 0.9 source and I >>> seem to have acquired some severe ghosting on capture from the >>> composite 1 input. This has me baffled as I would expect ghosting to >>> be an analogue side issue. But if I revert to the old kernel 2.6.16.17 >>> kernel and the 0.6 driver it goes away. Anyone got any ideas on this. >>> >>> >>> >>> Roger >>> >>> >>> >> Are you recording on any other size than max size for either NTSC or >> PAL? Scaling has that effect in recent versions of ivtv. >> >> > > Rudy, > > Any suggestions on how I might check this. I am using Mythtv 0.20 and I > haven't played with the capture card settings for a couple of years! Looking > through the mythtv settings table in MySql I can see a few > TVVidModeResolutionN paramters set to 640x480 but I suspect they are to do > with the TV-Out side which I am not using on the PVR350 (PAL). > > Just glancing through the list I can only see a reference to scaling to > being a problem with non saa7115 (my 350 is a saa7115) cards and VBI > captures. Have I missed something? > > > Roger > >
Roger, easy to test: go into mythfrontend, setup, TV-settings, recoding profiles. Change the profiles you use to record at NTSC or PAL native format and check whether ghosting is still present. You will either have to reboot or reload ivtv, as the scaling parameters are persistent. Rudy _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
