Moving to the user list.... pomidorabelisima wrote: > well, like all things in our lives - we make some and > brake some > right!? > > ivtv: ==================== START INIT IVTV > ==================== > ivtv: version 0.10.0 (v4l-dvb + ivtv virtual merge) > Revision: 3797 loading > ivtv: Linux version: 2.6.20 preempt mod_unload > PENTIUMIII 4KSTACKS > ivtv: In case of problems please include the debug > info between > ivtv: the START INIT IVTV and END INIT IVTV lines, > along with > ivtv: any module options, when mailing the ivtv-users > mailinglist. > ivtv0: User specified Digital Cowboy DCT-MTVP1 card > (detected cx23416
You should let it auto detect unless it is not recognizing the card. > based chip) > ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, > low) -> IRQ 22 > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 > bytes) > ivtv0: Encoder revision: 0x02060039 > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c > driver #0) > cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 > bytes) > ivtv0: Failed to load module upd64031a > ivtv0: Failed to load module upd64083 You need to have these modules selected/installed. > ivtv0: Registered device video0 for encoder MPEG (4 > MB) > ivtv0: Registered device video32 for encoder YUV (2 > MB) > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > ivtv0: Registered device video24 for encoder PCM audio > (1 MB) > ivtv0: i2c addr 0x21 not found for command 0x4008646f! > ivtv0: i2c addr 0x12 not found for command 0x4008646f! > ivtv0: i2c addr 0x5c not found for command 0x4008646f! > ivtv0: Initialized Digital Cowboy DCT-MTVP1, card #0 > ivtv: ==================== END INIT IVTV > ==================== > > this one should be for XC3028(XC2028) tuner based > card; > Digital Cowboy! See above. Greets Sander _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
