Sander Sweers wrote: > Moving to the user list.... > > pomidorabelisima wrote: >> well, like all things in our lives - we make some and >> brake some >> right!? >> >> ivtv: ==================== START INIT IVTV >> ==================== >> ivtv: version 0.10.0 (v4l-dvb + ivtv virtual merge) >> Revision: 3797 loading >> ivtv: Linux version: 2.6.20 preempt mod_unload >> PENTIUMIII 4KSTACKS >> ivtv: In case of problems please include the debug >> info between >> ivtv: the START INIT IVTV and END INIT IVTV lines, >> along with >> ivtv: any module options, when mailing the ivtv-users >> mailinglist. >> ivtv0: User specified Digital Cowboy DCT-MTVP1 card >> (detected cx23416 > > You should let it auto detect unless it is not recognizing the card.
this is broken, w/ or w/o automatic neither 'options ivtv cardtype=18(22) [tuner=71]' will do >> based chip) >> ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, >> low) -> IRQ 22 >> ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 >> bytes) >> ivtv0: Encoder revision: 0x02060039 >> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c >> driver #0) >> cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 >> bytes) >> ivtv0: Failed to load module upd64031a >> ivtv0: Failed to load module upd64083 > > You need to have these modules selected/installed. maybe if am Digital Cowboy! :)) >> ivtv0: Registered device video0 for encoder MPEG (4 >> MB) >> ivtv0: Registered device video32 for encoder YUV (2 >> MB) >> ivtv0: Registered device vbi0 for encoder VBI (1 MB) >> ivtv0: Registered device video24 for encoder PCM audio >> (1 MB) >> ivtv0: i2c addr 0x21 not found for command 0x4008646f! >> ivtv0: i2c addr 0x12 not found for command 0x4008646f! >> ivtv0: i2c addr 0x5c not found for command 0x4008646f! >> ivtv0: Initialized Digital Cowboy DCT-MTVP1, card #0 >> ivtv: ==================== END INIT IVTV ==================== >> >> this one should be for XC3028(XC2028) tuner based >> card; >> Digital Cowboy! > > See above. See below this is so called 'above bellows structures' :)) The card is working fine thanks to zolty patches: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.1 (tagged release) loading ivtv: Linux version: 2.6.18.2 preempt mod_unload PENTIUMIII 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: User specified Yuan PG600-2,Club3D ZAP-TV1x01 card (detected cx23416 based chip) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) Tuner: registering extension (Xceive 3028 Tuner) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011, 0x02040024 or 0x02050032. <- this is brand new fw! :)) ivtv0: Registered device video1 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi1 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio Tuner: setting up tuner core extension for: Xceive 3028 Tuner Loading base firmware: xc3028_init0.i2c.fw ivtv0: Resetting tuner Loading default analogue TV settings: xc3028_BG_PAL_NICAM_A.i2c.fw xc3028_set_std, Loading specific configuration for requested mode xc3028_MN_NTSCPAL_A2.i2c.fw ivtv0: Initialized Yuan PG600-2,Club3D ZAP-TV1x01, card #0 ivtv: ==================== END INIT IVTV ==================== xc3028_set_std, Loading specific configuration for requested mode xc3028_BG_PAL_NICAM_A.i2c.fw but no more on 2.6.20 w/ broken v4l-dvb tree(xceive!) Trick or Treats ____________________________________________________________________________________ It's here! Your new message! Get new email alerts with the free Yahoo! Toolbar. http://tools.search.yahoo.com/toolbar/features/mail/ _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
