>|Can you make a screenshot for people to see? 

That may take me a while.  The phenomenon is very dynamic: the fuzziness
disappears in tenths of a second at any one place.

 >|And also how is CPU usage when you have "fuzziness"? 

Cpu(s): 16.3%us,  2.7%sy,  0.0%ni, 80.1%id,  0.0%wa,  0.3%hi,  0.7%si,  0.0%st

%CPU %MEM   TIME+   COMMAND 
13.6  2.0   1:01.93 mplayer                           
4.0   3.2   0:30.70 Xorg                              
2.0   0.0   1:04.83 ivtv-enc                      

 >|Also it could be helpfull to see the INIT
 >|IVTV message from start to end. 

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.9.1 (tagged release) loading
ivtv:  Linux version: 2.6.19-1.2895.fc6 SMP mod_unload 686 REGPARM 4KSTACKS 
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 19
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0030670000036fde]
tveeprom 1-0050: Hauppauge model 32062, rev C199, serial# 8202626
tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is MSP3445 (idx 12)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has no radio, has IR remote
ivtv0: Autodetected Hauppauge WinTV PVR-250
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
msp3400 1-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP3445G-B8 supports radio, mode is autodetect and autoselect
ivtv0: Encoder revision: 0x02040024
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
tuner 1-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> 
IRQ 21
PCI: Setting latency timer of device 0000:00:11.5 to 64
ivtv:  ====================  END INIT IVTV  ====================


Module options:

alias char-major-81 ivtv
options ivtv yuv_buffers=32 mpg_buffers=16 vbi_buffers=16 pcm_buffers=16 
dec_osd_buffers=2

# lsmod | grep ivtv
ivtv                  167696  0 
i2c_algo_bit           12105  1 ivtv
cx2341x                15429  1 ivtv
tveeprom               18513  1 ivtv
videodev               28993  1 ivtv
v4l1_compat            16453  2 ivtv,videodev
v4l2_common            26305  6 ivtv,msp3400,saa7115,tuner,cx2341x,videodev
i2c_core               26049  9 
ivtv,i2c_ec,msp3400,saa7115,tuner,i2c_algo_bit,tveeprom,nvidia,i2c_viapro


_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to