On Tue, 2007-02-13 at 21:47 +0100, Ronald Hitz wrote: > Hi, > > I use a kernel 2.6.18, 'handmade', > and ivtv driver 0.8.2 > I placed firmware in /usr/lib/hotplug/firmware.
Try to put it in /lib/firmware. This is the place where it normally should go. Greets Sander > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.8.2 (tagged release) loading > ivtv: Linux version: 2.6.18.05022007 SMP mod_unload 686 REGPARM gcc-4.1 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge card (cx23416 based) > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 262144 bytes) > ivtv0: did you put the firmware in the hotplug firmware directory? > ivtv0 warning: failed loading encoder firmware > ivtv0 warning: Error loading firmware -3! > ivtv0: Error -3 initializing firmware. > ivtv0: Error -12 on initialization > ivtv: probe of 0000:02:01.0 failed with error -12 > ivtv: ==================== END INIT IVTV ==================== > > If I 'rmmod ivtv', and 'modprobe ivtv', the firmware is loaded, and the > drivers works. > So I know, the driver is ok and the firmware. > > There is no hotplug-agent in /usr/lib/hotplug, which couldn't probably > coexist with udev, vers. 103. > Maybe the problem is close to that, but I have no good idea to solve it. > > I'm grateful for help. > Thank You > > Ronald Hitz > > > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
