/so theoretically you should only need to turn off menu drawing with OpenGL and then the ubutnutu howto should work
/
Unfortunately, it does not. When I edited xorg.conf and restarted X, both monitor and TV go blank. Checking out Xorg.0.log revealed that X apparently found the Hauppauge chipset at the pci-adress of the Nvidia-graphics card and obviously ran into a fatal error (something with IVTVFB_IOCTL_GET_STATE device (null)). I entered the correct BusID's, so I am at a loss why X would confuse them. The error gives a few hits on google, but none are very useful.

Matt Andruff wrote:
just as an fyi it says on myth 20 version releas:
# Menus are now drawn by MythUI <http://mythtv.org/wiki/index.php/MythUI> using OpenGL <http://mythtv.org/wiki/index.php/OpenGL>. This option can be enabled/disabled in the Appearance settings.

so theoretically you should only need to turn off menu drawing with OpenGL and then the ubutnutu howto should work

On 4/25/07, *Matt Andruff* <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote:

    thanks for the great link. before they switched to open GL it also
    worked via frame buffer... check the ubuntu wiki here
    <https://help.ubuntu.com/community/MythTV_Edgy_hardware_pvr-350_TV-out>
    for more info on howto get the old packages to work
I'll definitley have to tak a look at your method for making it
    work as I understand that the packages no longer support it.
On 4/24/07, *Ricardo Lugo* <[EMAIL PROTECTED]
    <mailto:[EMAIL PROTECTED]>> wrote:

        On Apr 23, 2007, at 5:06 PM, Paul van Gerven wrote:

        Situation I'd like: mythtv (menu's, recordings, live tv etc)
        is always shown on the tv. Does that require getting X to be
        displayed through the 350's tv-out?

Some people have tried getting MythTV to output directly to
        the framebuffer using a special QT framework (Qt/Embedded &
        directfb?):

http://mythtv.org/wiki/index.php/MythTV_in_Framebuffer
        <http://mythtv.org/wiki/index.php/MythTV_in_Framebuffer>

But to my knowledge not been able to make it work 100%...

So, Yes, it does require X on the TV-out.
        It works very well - you can then watch media in various
        different codecs (XviD, etc) - but anything other than MPEG2
        will require additional CPU power.

- Rick


        Matt Andruff wrote:
        I'm not sure what step of the howto you followed upto.  It
        seems to me you probably finished the whole thing....

        Their are some different configurations I need to add to the
        howto.

        You can have your TV as the whole mythbox:

        You can have myth on a monitor and playback on TV.

        If you want to use mythtv to output to the tv and you want
        myth to be on your screen, you do not need to make any
        changes to xorg.conf.  Infact you should undo any changes
        and I believe that  will remove the black box from your screen.

        If You dowant to get mythtv on the TV but right now I'm not
        sure if that's what you want.

        You say "(that would require a driver that I did not
        install). " but I'm not sure what driver that is are you
        talking about "ivtv-fb"?


        On 4/22/07, *Paul vano Gerven* < [EMAIL PROTECTED]
        <mailto:[EMAIL PROTECTED]>> wrote:

            No, I am not running X on the TV (that would require a
            driver that I did not install). X is displayed on my
            monitor, but a terminal, I think it is tty1, is
            displayed on my tv. The terminal stays there when I put
            MythTV's output on the TV. So I can see the TV-images
            around the edges, but most of the screen's surface is
            being blocked by the black square (=the terminal).

            Incidentally, when I try to follow the steps to actually
            display X on my TV (in Matt's link below), I get stuck
            in the first step. modprobe ivtv-fb does NOT results in
            the suggested entries in /var/log/syslog... it does not
            result in any entry.

            Any ideas?

            Paul

            Matt Andruff wrote:
            so you have X on your tv out.(awesome) your just having
            issues with playbacK in Myth? Have you taken the step
            to enable playback on tv in Myth
            
<https://help.ubuntu.com/community/MythTV_Feisty_hardware_pvr-350_TV-out#head-b95b766c73b58a224b1418e7d3a22d7ddad267bc>?

            On 4/22/07, *Paul van Gerven*
            <[EMAIL PROTECTED]
            <mailto:[EMAIL PROTECTED]>> wrote:

                I have been struggling to get my TV-out working on
                ivtv (installed on Ubuntu Feisty). Mythtv works
                fine, so ivtv is installed correctly. (I can use my
                'other' TV-output which converts VGA to Composite.
                The quality of this picture is acceptable, but not
                great; I know the 350's TV-out is much better).

                I can give the following information:

                1) As soon as I connected the TV-out cable to the
                350 and the TV, I got a black screen on the TV.
                This means it is sending a signal, because the
                screen is blue when the TV is not getting any
                signal at all.

                2) I live in Europe, and need a PAL(-B/G) signal.

                3) I played around with some old (!) information from

                http://ivtv.writeme.ch/tiki-index.php?page=TvOutPal
                and
                http://ivtv.writeme.ch/tiki-index.php?page=TvOutHowto
                <http://ivtv.writeme.ch/tiki-index.php?page=TvOutHowto>

                which instructs what lines to add to
                /etc/modprobe.d/aliases (I think thats the Ubuntu
                equivalent of /etc/modules.conf). Long story short,
                some combination of lines (which I cannot remember
                and have not been able to reproduce) gave a crystal
                clear TV-output with MythTV (which I set up to use
                /dev/video16). However: no sound and no overlay
                (for example, when I activated the program guide,
                it would not appear on the screen).

                I remember examining the output of dmesg and it
                seemed the lines I was adding to aliases contained
                syntaxes that were not (or no longer) recognized.
                Which line/command was the magic one to enable the
                TV-out, I cannot tell.

                4) I restored my original aliases file, but added

                install ivtv /sbin/modprobe --ignore-install ivtv; 
/sbin/modprobe ivtv-fb

                as suggested in



                http://www.mythtv.org/wiki/index.php/IVTV_Install
                and updated the modules and rebooted. By chance I
                noticed some text flashing on the TV while
                rebooting! Now, If I press cntrl-alt-f1 my monitor
                goes blank and I see the terminal on the TV. Also
                when booting into recovery mode, I see the messages
                floating by on my monitor until it hits ivtv0-fb,
                after which the output switches to the TV.

                /In this situation, when I watch TV on MythTV, I
                get a black screen with the terminal covering
                almost all of the screen. Only at the edges I see a
                TV-picture. Also, still no sound. /

                5) When I do: sudo rmmod saa7127, the tv-screen
                goes blue, as expected.

                6) Current output of dmesg:

                [   16.543497] ivtv:  ==================== START
                INIT IVTV ====================
                [   16.543500] ivtv:  version 0.10.1 (tagged
                release) loading
                [   16.543501] ivtv:  Linux version:
                2.6.20-15-generic SMP mod_unload 586
                [   16.543503] ivtv:  In case of problems please
                include the debug info between
                [   16.543504] ivtv:  the START INIT IVTV and END
                INIT IVTV lines, along with
                [   16.543506] ivtv:  any module options, when
                mailing the ivtv-users mailinglist.
                [   16.543793] ivtv0: Autodetected Hauppauge card
                (cx23415 based)
                [   17.215564] ivtv0: loaded v4l-cx2341x-enc.fw
                firmware (262144 bytes)
                [   17.237366] ivtv0: loaded v4l-cx2341x-dec.fw
                firmware (262144 bytes)
                [   17.464035] ivtv0: Encoder revision: 0x02050032
                [   17.464037] ivtv0: Recommended firmware version
                is 0x02060039.
                [   17.472094] ivtv0: Decoder revision: 0x02020023
                [   17.540695] ivtv0: Autodetected Hauppauge WinTV
                PVR-350
                [   17.561657] tuner 0-0043: chip found @ 0x86
                (ivtv i2c driver #0)
                [   17.566192] tuner 0-0061: chip found @ 0xc2
                (ivtv i2c driver #0)
                [   17.632573] saa7115 0-0021: saa7115 found
                (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
                [   17.873437] saa7127 0-0044: saa7129 found @ 0x88
                (ivtv i2c driver #0)
                [   17.901274] msp3400 0-0040: MSP4418G-B3 found @
                0x80 (ivtv i2c driver #0)
                [   17.901358] ivtv0: Registered device video0 for
                encoder MPEG (4 MB)
                [   17.901473] ivtv0: Registered device video32 for
                encoder YUV (2 MB)
                [   17.901601] ivtv0: Registered device vbi0 for
                encoder VBI (1 MB)
                [   17.901649] ivtv0: Registered device video24 for
                encoder PCM audio (1 MB)
                [   17.901805] ivtv0: Registered device radio0 for
                encoder radio
                [   17.901825] ivtv0: Registered device video16 for
                decoder MPEG (1 MB)
                [   17.901863] ivtv0: Registered device vbi8 for
                decoder VBI (1 MB)
                [   17.902132] ivtv0: Registered device vbi16 for
                decoder VOUT
                [   17.902152] ivtv0: Registered device video48 for
                decoder YUV (1 MB)
                [   17.976424] ivtv0: loaded v4l-cx2341x-init.mpg
                firmware (155648 bytes)
                [   18.463544 ] ivtv0: Initialized Hauppauge WinTV
                PVR-350, card #0
                [   18.463552] ivtv:  ====================  END
                INIT IVTV  ====================
                [   18.490481] ivtv0-fb: Framebuffer at 0xf5510000,
                mapped to 0xfa390000, size 1665k
                [   18.565743] ivtv0-fb: === Validated display
                mode  ===
                [   18.565745] ivtv0-fb: Display size 640x480
                (640x480 Virtual) @ 8bpp
                [   18.565746] ivtv0-fb: Display position 41,49
                [   18.565747] ivtv0-fb: Display filter : on
                [   18.565748] ivtv0-fb: Color space : RGB
                [   18.590694] ivtv0-fb: === Display mode change ===
                [   18.590697] ivtv0-fb: Display size 640x480
                (640x480 Virtual) @ 8bpp
                [   18.590699] ivtv0-fb: Display position 41,49
                [   18.590701] ivtv0-fb: Display filter : on
                [   18.590702] ivtv0-fb: Color space : RGB
                [   18.614861] ivtv0-fb: Framebuffer registered on
                ivtv card id 0
                [   43.551436] ivtv0-fb: === Validated display
                mode  ===
                [   43.551439] ivtv0-fb: Display size 640x480
                (640x480 Virtual) @ 8bpp
                [   43.551440] ivtv0-fb: Display position 41,49
                [   43.551441] ivtv0-fb: Display filter : on
                [   43.551442] ivtv0-fb: Color space : RGB
                [   43.559209] ivtv0-fb: === Display mode change ===
                [   43.559212] ivtv0-fb: Display size 640x480
                (640x480 Virtual) @ 8bpp
                [   43.559214] ivtv0-fb: Display position 41,49
                [   43.559216] ivtv0-fb: Display filter : on
                [   43.559217] ivtv0-fb: Color space : RGB



                I am getting very close to a solution, but after
                many hours of googling and reading I am kind of
                stuck here. The documentation on this is mostly
                outdated, I feel. Any help would be greatly
                appreciated (as in... I'll do your chemistry
                homework ;) )

                Regards,

                Crakie

                _______________________________________________
                ivtv-users mailing list
                [email protected]
                <mailto:[email protected]>
                http://ivtvdriver.org/mailman/listinfo/ivtv-users




-- --Ultimate is my Mistress -- --
            --
            -- However, if sexualizing Ultimate as a female offends
            you please
            -- read the above line as:  "Sometimes a Cigar is Just
            a Cigar"
            --
            -- Alternatively if Phalic nature of Cigar offends you.
            -- and you insist on attributing gender issues to my
            attempts at humor.
            -- Please read the signature as:
            -- Ultimate is my Lover (possibly Male or Female but
            neither implied)
            
------------------------------------------------------------------------
            _______________________________________________
            ivtv-users mailing list
            [email protected] <mailto:[email protected]>

            http://ivtvdriver.org/mailman/listinfo/ivtv-users

            _______________________________________________
            ivtv-users mailing list
            [email protected]
            <mailto:[email protected]>
            http://ivtvdriver.org/mailman/listinfo/ivtv-users




-- --Ultimate is my Mistress -- --
        --
        -- However, if sexualizing Ultimate as a female offends you
        please
        -- read the above line as:  "Sometimes a Cigar is Just a Cigar"
        --
        -- Alternatively if Phalic nature of Cigar offends you.
        -- and you insist on attributing gender issues to my
        attempts at humor.
        -- Please read the signature as:
        -- Ultimate is my Lover (possibly Male or Female but neither
        implied)
        ------------------------------------------------------------------------
        _______________________________________________
        ivtv-users mailing list
        [email protected] <mailto:[email protected]>
        http://ivtvdriver.org/mailman/listinfo/ivtv-users
        _______________________________________________
        ivtv-users mailing list
        [email protected] <mailto:[email protected]>
        http://ivtvdriver.org/mailman/listinfo/ivtv-users

        _______________________________________________
        ivtv-users mailing list
        [email protected] <mailto:[email protected]>
        http://ivtvdriver.org/mailman/listinfo/ivtv-users




-- --Ultimate is my Mistress -- --
    --
    -- However, if sexualizing Ultimate as a female offends you please
    -- read the above line as:  "Sometimes a Cigar is Just a Cigar"
    --
    -- Alternatively if Phalic nature of Cigar offends you.
    -- and you insist on attributing gender issues to my attempts at
    humor.
    -- Please read the signature as:
    -- Ultimate is my Lover (possibly Male or Female but neither implied)




--
--Ultimate is my Mistress
--
--
--
-- However, if sexualizing Ultimate as a female offends you please
-- read the above line as:  "Sometimes a Cigar is Just a Cigar"
--
-- Alternatively if Phalic nature of Cigar offends you.
-- and you insist on attributing gender issues to my attempts at humor.
-- Please read the signature as:
-- Ultimate is my Lover (possibly Male or Female but neither implied)
------------------------------------------------------------------------

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to