Hello! I'm using Ubuntu 7.04 Server Edition with an Hauppauge PVR350 (ivtv version 0.10.1). When using ivtv-fb to transfer the console output to tv-out everything is working perfectly but after 10 minutes the console just disapears and the tv screen is black again ? Is there some sort of timeout ? or stand-by mode that is activated after 10 minutes ?
thx in advance. lukas. P.S.: The relevant dmesg output. [ 25.805313] ivtv: ==================== START INIT IVTV ==================== [ 25.805321] ivtv: version 0.10.1 (tagged release) loading [ 25.805324] ivtv: Linux version: 2.6.20-15-server SMP mod_unload 686 [ 25.805328] ivtv: In case of problems please include the debug info between [ 25.805332] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 25.805335] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 25.805505] ivtv0: Autodetected Hauppauge card (cx23415 based) [ 25.805622] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 27.349750] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [ 27.502751] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) [ 27.740854] ivtv0: Encoder revision: 0x02050032 [ 27.740861] ivtv0: Recommended firmware version is 0x02060039. [ 27.750873] ivtv0: Decoder revision: 0x02020023 [ 27.818320] ivtv0: Autodetected Hauppauge WinTV PVR-350 [ 27.849235] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 27.929729] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) [ 28.164797] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) [ 28.196070] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) [ 28.196455] ivtv0: Registered device video0 for encoder MPEG (4 MB) [ 28.196754] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 28.197055] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 28.197162] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 28.197542] ivtv0: Registered device radio0 for encoder radio [ 28.197570] ivtv0: Registered device video16 for decoder MPEG (1 MB) [ 28.197647] ivtv0: Registered device vbi8 for decoder VBI (1 MB) [ 28.198276] ivtv0: Registered device vbi16 for decoder VOUT [ 28.198303] ivtv0: Registered device video48 for decoder YUV (1 MB) [ 28.259634] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) [ 28.757576] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 [ 28.757616] ivtv: ==================== END INIT IVTV ==================== [ 390.294163] ivtv0-fb: Framebuffer at 0xd9510000, mapped to 0xe1790000, size 1665k [ 390.367170] ivtv0-fb: === Validated display mode === [ 390.367180] ivtv0-fb: Display size 640x480 (640x480 Virtual) @ 8bpp [ 390.367185] ivtv0-fb: Display position 41,49 [ 390.367188] ivtv0-fb: Display filter : on [ 390.367191] ivtv0-fb: Color space : RGB [ 390.394180] ivtv0-fb: === Display mode change === [ 390.394188] ivtv0-fb: Display size 640x480 (640x480 Virtual) @ 8bpp [ 390.394192] ivtv0-fb: Display position 41,49 [ 390.394195] ivtv0-fb: Display filter : on [ 390.394198] ivtv0-fb: Color space : RGB [ 390.434093] ivtv0-fb: === Display mode change === [ 390.434100] ivtv0-fb: Display size 640x480 (640x480 Virtual) @ 8bpp [ 390.434103] ivtv0-fb: Display position 41,49 [ 390.434106] ivtv0-fb: Display filter : on [ 390.434109] ivtv0-fb: Color space : RGB [ 390.454135] ivtv0-fb: Framebuffer registered on ivtv card id 0 _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
