Hey, Are there audio settings available using ivtvctl? Is there another dependency that could cause the single audio play back? I am using spdif for audio.
Al Al McIntosh wrote: > I upgrade to the following this afternoon: > ivtv-kmdl-2.6.20-1.2948.fc6-0.10.1-126.fc6 > ivtv-0.10.1-126.fc6.at > > Now my recordings only have sound in the front left channel. There is no > sound coming from center or front right. Recordings before had sound > from all front channels. This is the same for recordings within Mythtv > and cat /dev/video0 > out.mpg. > > Is there something I can tweak to get my surround back? Or is there > development in the audio module of the driver? > > Any ideas? > > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.10.1 (tagged release) loading > ivtv: Linux version: 2.6.20-1.2948.fc6 SMP mod_unload 686 4KSTACKS > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge card (cx23416 based) > ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 18 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 755kHz > hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > input: PC Speaker as /class/input/input2 > e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI > e100: Copyright(c) 1999-2006 Intel Corporation > nvidia: module license 'NVIDIA' taints kernel. > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv0: Encoder revision: 0x02060039 > tveeprom 0-0050: Hauppauge model 32062, rev B185, serial# 2868847 > tveeprom 0-0050: tuner model is TCL 2002N 6A (idx 85, type 50) > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 0-0050: audio processor is MSP3445 (idx 12) > tveeprom 0-0050: decoder processor is SAA7115 (idx 19) > tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter > ivtv0: Autodetected Hauppauge WinTV PVR-250 > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) > msp3400 0-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0) > msp3400 0-0040: MSP3445G-B8 supports radio, mode is autodetect and > autoselect > ivtv0: Registered device video0 for encoder MPEG (4 MB) > ivtv0: Registered device video32 for encoder YUV (2 MB) > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > tuner 0-0061: type set to 50 (TCL 2002N) > ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 > ivtv: ==================== END INIT IVTV ==================== > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
