I upgrade to the following this afternoon: ivtv-kmdl-2.6.20-1.2948.fc6-0.10.1-126.fc6 ivtv-0.10.1-126.fc6.at
Now my recordings only have sound in the front left channel. There is no sound coming from center or front right. Recordings before had sound from all front channels. This is the same for recordings within Mythtv and cat /dev/video0 > out.mpg. Is there something I can tweak to get my surround back? Or is there development in the audio module of the driver? Any ideas? ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.1 (tagged release) loading ivtv: Linux version: 2.6.20-1.2948.fc6 SMP mod_unload 686 4KSTACKS ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 18 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 755kHz hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 input: PC Speaker as /class/input/input2 e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation nvidia: module license 'NVIDIA' taints kernel. ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 tveeprom 0-0050: Hauppauge model 32062, rev B185, serial# 2868847 tveeprom 0-0050: tuner model is TCL 2002N 6A (idx 85, type 50) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is MSP3445 (idx 12) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-250 tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) msp3400 0-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0) msp3400 0-0040: MSP3445G-B8 supports radio, mode is autodetect and autoselect ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) tuner 0-0061: type set to 50 (TCL 2002N) ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
