Hi all, would love some help. I'm running a standard Ubuntu 7.04 install, I have Hauppage PVR 250. I'm in Australia, trying to get my card to work with PAL tv channels.
I can get my card to tune to a tv channel without to much of a problem but I can't get sound at the same time. If however I manually tune my card up by 5.5Khz, I get sound but not picture. I have no idea how I fix this. To the best of my knowledge I have installed the latest firmware (in /lib/firmware). Thanks anyone that can help, - step. Here's the dmesg output: [ 51.659022] ivtv: ==================== START INIT IVTV ==================== [ 51.659028] ivtv: version 0.10.1 (tagged release) loading [ 51.659031] ivtv: Linux version: 2.6.20-15-generic SMP mod_unload 586 [ 51.659033] ivtv: In case of problems please include the debug info between [ 51.659035] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 51.659038] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 51.659207] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 51.717084] PCI: Enabling device 0000:00:13.0 (0014 -> 0016) [ 51.717102] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 20 [ 51.717116] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 51.849763] nvidia: module license 'NVIDIA' taints kernel. [ 52.172469] input: PC Speaker as /class/input/input3 [ 52.639454] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 52.858492] ivtv0: Encoder revision: 0x02060039 [ 52.926918] tveeprom 1-0050: Hauppauge model 32059, rev B143, serial# 7306200 [ 52.926925] tveeprom 1-0050: tuner model is Temic 4046FM5 (idx 43, type 22) [ 52.926929] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 52.926933] tveeprom 1-0050: audio processor is MSP4418 (idx 25) [ 52.926936] tveeprom 1-0050: decoder processor is SAA7115 (idx 19) [ 52.926939] tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter [ 52.926943] ivtv0: Autodetected Hauppauge WinTV PVR-250 [ 52.957972] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 53.039635] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) [ 53.248410] msp3400 1-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) [ 53.248416] msp3400 1-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect [ 53.250154] ivtv0: Registered device video0 for encoder MPEG (4 MB) [ 53.250436] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 53.250729] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 53.250829] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 53.251156] tuner 1-0061: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) [ 53.651082] ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 [ 53.651113] ivtv: ==================== END INIT IVTV ==================== -- http://step.net.au
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
