hi,.. any help me, I have problem in kernel 2.6.17-1.2174.fc5 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.1 (tagged release) loading ivtv: Linux version: 2.6.17-1.2174.fc5 mod_unload 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 201 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 1-0050: Hauppauge model 26559, rev B260, serial# 8746390 tveeprom 1-0050: tuner model is LG S001D MK3 (idx 60, type 38) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: unable to open firmware v4l-cx25840.fw wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: unable to open firmware v4l-cx2341x-enc.fw ivtv0: did you put the firmware in the hotplug firmware directory? ivtv0 warning: failed loading encoder firmware ivtv0 warning: Error loading firmware -3! ivtv0: Error -3 initializing firmware. ivtv0: Error -12 on initialization ivtv: probe of 0000:00:09.0 failed with error -12
thank _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
