It doesn't look like anything wrong to me however I could be wrong. What
app are you trying to view with? I have the PVR-150 MCE flavor and
Kubuntu Feisty 64 with MythTV as the viewing app. Feisty has everything
included for this card with your Kernel version. 

Ubuntu Forum Quote;
PVR-150/150MCE/250/250MCE - supported out of the box

I just installed MythTV according to the guide at
https://help.ubuntu.com/community/MythTV#head-5c90afbe1e30cc1b14ba2badb41a8b170f37b24e

Also view this link to add the IVTV repo to your sources to make sure
you have all the IVTV items. 
https://help.ubuntu.com/community/Install_IVTV_Feisty

Tony






On Fri, 2007-06-22 at 06:51 -0700, Brett Phinney wrote:
> Hi Everyone,I am trying to get my PVR-150 working with Ubuntu feisty.
> I get this message below. After a bit of research I guess this has
> something to do with a bug? for this chip with certain kernels maybe?
> I'm pretty new to this, so I have no idea how to fix it. Any ideas? 
> 
> Thanks again
> 
> Brett
> 
> 
> 
> 
> IVTV =/p;/= START INIT IVTV =/q' | tac
> [   53.510275] ivtv:  ==================== START INIT IVTV
> ====================
> [   53.510279] ivtv:  version 0.10.1 (tagged release) loading 
> [   53.510281] ivtv:  Linux version: 2.6.20-16-generic SMP mod_unload
> 586 
> [   53.510283] ivtv:  In case of problems please include the debug
> info between
> [   53.510285] ivtv:  the START INIT IVTV and END INIT IVTV lines,
> along with 
> [   53.510286] ivtv:  any module options, when mailing the ivtv-users
> mailinglist.
> [   53.510393] ivtv0: Autodetected Hauppauge card (cx23416 based)
> [   53.510997] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 
> [   53.511005] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] ->
> GSI 16 (level, high) -> IRQ 20
> [   53.511017] ivtv0: Unreasonably low latency timer, setting to 64
> (was 32)
> [   53.525721] bcm43xx driver 
> [   53.545923] usb 2-3: reset full speed USB device using ohci_hcd and
> address 2
> [   53.772535] lirc_dev: lirc_register_plugin: sample_rate: 0
> [   53.778346] lirc_mceusb2[2]: Philips eHome Infrared Transceiver on
> usb2:2 
> [   53.778382] usbcore: registered new interface driver lirc_mceusb2
> [   54.201438] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144
> bytes)
> [   54.417374] ivtv0: Encoder revision: 0x02050032
> [   54.417378] ivtv0: Recommended firmware version is 0x02060039. 
> [   54.484321] tveeprom 2-0050: Hauppauge model 26052, rev C185,
> serial# 7579748
> [   54.484326] tveeprom 2-0050: tuner model is TCL 2002N 6A (idx 85,
> type 50)
> [   54.484329] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) 
> [   54.484331] tveeprom 2-0050: audio processor is CX25843 (idx 37)
> [   54.484334] tveeprom 2-0050: decoder processor is CX25843 (idx 30)
> [   54.484336] tveeprom 2-0050: has no radio, has IR receiver, has IR
> transmitter 
> [   54.484339] ivtv0: Autodetected Hauppauge WinTV PVR-150
> [   54.484341] ivtv0: reopen i2c bus for IR-blaster support
> [   54.567954] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> [   54.802325] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) 
> [   54.812651] ivtv0: Registered device video0 for encoder MPEG (4 MB)
> [   54.812828] ivtv0: Registered device video32 for encoder YUV (2 MB)
> [   54.813022] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
> [   54.813133] ivtv0: Registered device video24 for encoder PCM audio
> (1 MB)
> [   54.813318] tuner 2-0061: type set to 50 (TCL 2002N)
> [   54.813324] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for
> command 0xc008561c! 
> [   54.813328] ivtv0: i2c addr 0x44 not found for command 0x4008646f!
> [   54.816433] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for
> command 0x4008646d!
> [   54.921034] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for
> command 0xc008561c! 
> [   54.922312] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for
> command 0xc008561c!
> [   55.032960] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for
> command 0xc008561c!
> [   55.032964] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 
> [   55.032981] ivtv:  ====================  END INIT IVTV
> ====================
> 
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users


_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to