Hello all, I am using a Hauppauge PVR-350 card and yesterday I upgraded to fedora 7. I am using the ivtv modules from atrpms.
I live in the Netherlands, where we use the PAL-B/G standard. When I try to playback some video on the tv-out of the PVR-350 the picture is not good. I have taken a picture from my tv, it is on http://albatros.xs4all.nl/~jurgen/tv-out-pal-b.jpg The only way to get a good picture is to set the PVR-350 tv out to pal-m (with command v4l2-ctl -s 3) (picture: http://albatros.xs4all.nl/~jurgen/tv-out-pal-m.jpg) But this gives problems with mythtv. Installed versions on the system: ivtv-kmdl-2.6.21-1.3194.fc7-0.10.3-129.fc7 ivtv_xdriver-0.10.7-8_r3843.fc6.at ivtv-firmware-20070217-13.at perl-Video-ivtv-0.13-8.fc7 ivtv-devel-1.0.1-133.fc7 video4linux-ivtv-kmdl-2.6.21-1.3194.fc7-20070420-80.fc7 kernel-2.6.21-1.3194.fc7 BTW: The v4l-cx2341x-init.mpg is not part of the ivtv-firmware package. I picked this file from the firmware tarball from ivtvdriver.org and put it in /lib/firmware Output of dmesg: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.3 (tagged release) loading ivtv: Linux version: 2.6.21-1.3194.fc7 SMP mod_unload 686 4KSTACKS ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23415 based) ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0: Decoder revision: 0x02020023 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and autoselect lirc_i2c: chip found @ 0x18 (Hauppauge IR) lirc_dev: lirc_register_plugin: sample_rate: 10 tveeprom 1-0050: Hauppauge model 48134, rev J347, serial# 7013431 tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28) tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 1-0050: audio processor is MSP4418 (idx 25) tveeprom 1-0050: decoder processor is SAA7115 (idx 19) tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-350 ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG (1 MB) ivtv0: Registered device vbi8 for decoder VBI (1 MB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1 MB) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== Hope you can help me. Regards, Jurgen Goedbloed. _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
