Hi Everybody,
I have a WinTV PVR 350 card working on linux Gentoo , kernel 2.6.21 and ivtv
10.0. I am writing here because I've got some problem with the capture. My card
is connect to my VCR by the composite cable and I try to record my old VHS. The
link belove shows you a screen capture of the result of a video capture made
with the PVR 350 . Do you see at the bottom of the image the thin trouble ? It
seems like the there is a sync problem. I am living in France, so we work in
PAL/SECAM 720x576.
For information, here is the output of the v4l2-ctl -V command :
Format:
Type : Video Capture
Width/Height : 720/576
Pixel Format : MPEG
Field : Interlaced
Bytes per Line: 0
Size Image : 131072
Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601).
I tried to change many settings (as video_aspect) but without success. However,
I must tell that I am not an expert and so maybe I missed something. Any idea
where the problem is coming from and how to solve it ?
Thanks a lot for your help and I apologize for my bad english
Fx
Screen capture :
http://jeremy.belpois.free.fr/images/ImageCapture.png
Output of dmesg for ivtv
Linux video capture interface: v2.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.1 (tagged release) loading
ivtv: Linux version: 2.6.21-gentoo SMP mod_unload
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 19 (level, low) -> IRQ 19
eth0: Marvell Yukon 88E8001 Gigabit Ethernet Controller
PrefPort:A RlmtMode:Check Link State
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.14 addr 0xff7fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2
sky2 eth1: addr 00:18:f3:68:a2:89
ivtv0: Autodetected Hauppauge card (cx23415 based)
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
tveeprom 1-0050: Hauppauge model 48139, rev K257, serial# 8577267
tveeprom 1-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom
0x74)
tveeprom 1-0050: audio processor is MSP4418 (idx 25)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-350
tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and
autoselect
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG (1 MB)
ivtv0: Registered device vbi8 for decoder VBI (1 MB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1 MB)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
output of lspci
05:01.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2
Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
output of v4l2tv-ctl --log-status
Status Log:
ivtv0: ================= START STATUS CARD #0 =================
tveeprom 1-0050: Hauppauge model 48139, rev K257, serial# 8577267
tveeprom 1-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
(eeprom 0x74)
tveeprom 1-0050: audio processor is MSP4418 (idx 25)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
tda9887 1-0043: Data bytes: b=0x04 c=0x0e e=0x49
tuner 1-0061: Tuner mode: analog TV
tuner 1-0061: Frequency: 400.00 MHz
tuner 1-0061: Standard: 0x00ff0000
saa7115 1-0021: Audio frequency: 48000 Hz
saa7115 1-0021: Input: Composite 5
saa7115 1-0021: Video signal: VCR
saa7115 1-0021: Frequency: 50 Hz
saa7115 1-0021: Detected format: SECAM
saa7115 1-0021: Width, Height: 720, 576
saa7127 1-0044: Standard: 50 Hz
saa7127 1-0044: Input: normal
saa7127 1-0044: Output: S-Video + Composite
saa7127 1-0044: WSS: disabled
saa7127 1-0044: VPS: disabled
saa7127 1-0044: CC: disabled
msp3400 1-0040: MSP4418G-B3 rev1 = 0x0217 rev2 = 0x1243
msp3400 1-0040: Audio: volume 58880
msp3400 1-0040: Mode: External input
msp3400 1-0040: Audmode: 0x0001
msp3400 1-0040: Routing: 0x00222220 (input) 0x00000044 (output)
msp3400 1-0040: ACB: 0x0c00
ivtv0: Video Input: Composite 3
ivtv0: Audio Input: Line In 1
ivtv0: Video Output: S-Video + Composite
ivtv0: Audio Output: A/V Audio Out
ivtv0: Output Mode: None
ivtv0: Tuner: TV
ivtv0: Stream: MPEG-2 DVD-compatible Stream
ivtv0: VBI Format: Private packet, IVTV format
ivtv0: Video: 720x576, 25 fps
ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 6000000, Peak 8000000
ivtv0: Video: GOP Size 12, 2 B-Frames, GOP Closure
ivtv0: Audio: 48 kHz, Layer II, 224 kbps, Stereo, No Emphasis, No CRC
ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0
ivtv0: Temporal Filter: Manual, 8
ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
ivtv0: Status flags: 0x00000000
ivtv0: Stream encoder MPEG: status 0x0000, 0% of 4096 KiB (128 buffers) in
use
ivtv0: Stream encoder YUV: status 0x0000, 0% of 2037 KiB (161 buffers) in use
ivtv0: Stream encoder VBI: status 0x0000, 0% of 1023 KiB (40 buffers) in use
ivtv0: Stream encoder PCM audio: status 0x0000, 0% of 1021 KiB (227 buffers)
in use
ivtv0: Stream decoder MPEG: status 0x0000, 0% of 1024 KiB (16 buffers) in use
ivtv0: Stream decoder VBI: status 0x0000, 0% of 1023 KiB (455 buffers) in use
ivtv0: Stream decoder YUV: status 0x0000, 0% of 1012 KiB (20 buffers) in use
ivtv0: Read MPEG/VBI: 0/0 bytes
ivtv0: ================== END STATUS CARD #0 ==================
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
