I am having some issues with live playback. It just started after a reboot, I havent changed anything since it was installed. The mythfrontend end returns 'TV Error: LiveTV not successfully started' and the channels are all black. I am thinking its the ivtv driver? Any ideas?
The output for `v4l2-ctl -T` Tuner: Capabilities : 62.5 kHz Frequency range : 0.0 MHz - 0.0 MHz Signal strength : 0% Current audio mode : mono Available subchannels: I tried swapping cables. Is my card dead? Does anyone have another checks I can run? ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.3 (tagged release) loading ivtv: Linux version: 2.6.20-1.2952.fc6 SMP mod_unload ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23415 based) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) input: PC Speaker as /class/input/input3 nvidia: module license 'NVIDIA' taints kernel. parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] sd 0:0:0:0: Attached scsi generic sg0 type 0 Floppy drive(s): fd0 is 1.44M ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) FDC 0 is a post-1991 82077 ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0: Decoder revision: 0x02020023 tveeprom 0-0050: Hauppauge model 48132, rev K268, serial# 9888664 tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is MSP4448 (idx 27) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-350 saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) ivtv0: Failed to load module saa7127 ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG (1 MB) ivtv0: Registered device vbi8 for decoder VBI (1 MB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1 MB) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0x4008646d! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
