Thanks for the assistance. I was never able to remove the error , however upgrading to Axel's (Thanks Axel!) packages has at least made the error go away. Dont know what I was doing wrong, but it seems that Axel and his packages are my savior...
I have managed to run into another error getting tv-out on the PVR-350 with this version, but I'm still reading some of the suggestions that you made to others experiencing this so I'm going to hold off asking questions until I get that figured out. It appears the fix is getting the latest Xdriver from here: http://ivtvdriver.org/viewcvs/xdriver/trunk.tar.gz?view=tar Will report back with my success. THanks for the patients... Larry Hans Verkuil wrote: > On Sunday 26 August 2007 02:48:03 Larry wrote: >> OK, I removed my head from someplace it finds itself quite often >> these days and rebooted to a proper kernel... >> >> After that I was able to make and make install.... > > Hmm, first remove driver/ivtv-driver.h, then do make and make install > again. I think it picked the wrong header originally and my make isn't > smart enough yet (just fixed that, though) to force a rebuild of > ivtv-driver.h at all times. > > Regards, > > Hans > >> I'm still getting this error however... >> >> ivtv0-fb: Framebuffer at 0x1510000, mapped to 0x00510000, size 1665k >> mtrr: type mismatch for 1400000,400000 old: write-back new: >> write-combining ivtv0-fb: warning: mtrr_add() failed to add write >> combining region 0x01400000-0x01800000 >> BUG: unable to handle kernel paging request at virtual address >> 00510000 printing eip: >> e0cf82d8 >> *pde = 00000000 >> Oops: 0002 [#1] >> SMP >> last sysfs file: /class/firmware/0000:02:0b.0/loading >> Modules linked in: ivtv_fb(F)(U) msp3400 saa7127 saa7115 tuner >> snd_intel8x0(F)(U) snd_ac97_codec(F)(U) ac97_bus(F)(U) >> snd_seq_dummy(F)(U) ivtv snd_seq_oss(F)(U) snd_seq_midi_even >> t(F)(U) snd_seq(F)(U) snd_seq_device(F)(U) i2c_algo_bit >> snd_pcm_oss(F)(U) snd_mixer_oss(F)(U) cx2341x tveeprom i2c_i801 >> iTCO_wdt i2c_core snd_pcm(F)(U) iTCO_vendor_support floppy >> videodev 3c59x snd_timer(F)(U) v4l2_common mii snd(F)(U) intel_rng >> v4l1_compat soundcore snd_page_alloc(F)(U) parport_pc ide_cd parport >> rtc_cmos cdrom dm_snapshot dm_zero dm_mir >> ror dm_mod ata_piix libata sd_mod scsi_mod ext3 jbd mbcache ehci_hcd >> ohci_hcd uhci_hcd >> CPU: 0 >> EIP: 0060:[<e0cf82d8>] Tainted: GF VLI >> EFLAGS: 00010206 (2.6.22.2-42.fc6 #1) >> EIP is at ivtvfb_init_card+0x1c5/0x696 [ivtv_fb] >> eax: 00000000 ebx: ffe00000 ecx: 00068100 edx: 001a0400 >> esi: de970000 edi: 00510000 ebp: e0cfa400 esp: dedbae1c >> ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 >> Process modprobe (pid: 1343, ti=dedba000 task=ded36c00 >> task.ti=dedba000) Stack: e0cf92c7 00000000 01400000 01800000 00000681 >> 00000000 00000001 00510000 >> 002c0800 00000000 00000000 00000000 00000000 00000000 00000000 >> 00000000 >> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 >> de970000 >> Call Trace: >> [<e0ccc05a>] ivtvfb_init+0x5a/0xcc [ivtv_fb] >> [<c04446e4>] sys_init_module+0x1699/0x17d2 >> [<e0d3f27b>] ivtv_udma_setup+0x0/0x232 [ivtv] >> [<c04798f2>] vfs_read+0xa6/0x158 >> [<c0404f8e>] syscall_call+0x7/0xb >> [<c0620000>] xfrm_alloc_spi+0x18/0x158 >> ======================= >> Code: 89 4c 24 04 c7 04 24 c7 92 cf e0 89 54 24 0c 89 44 24 08 e8 e6 >> fe 72 df 8b 86 f0 f4 00 00 8b 50 18 8b 78 14 31 c0 89 d1 c1 e9 02 >> <f3> ab f6 c2 02 74 02 66 ab f6 c2 01 74 01 >> aa 80 7e 19 00 8b 86 >> EIP: [<e0cf82d8>] ivtvfb_init_card+0x1c5/0x696 [ivtv_fb] SS:ESP >> 0068:dedbae1c >> >> Larry wrote: >>> Ignore my line 755 info... >>> >>> Wrong file :) (and see again why I'm not a programmer..lack of >>> attention to detail...) >>> >>> Larry wrote: >>>> Hans, >>>> >>>> Just tried it and got this: >>>> >>>> In file included from /root/ivtv/ivtv-1.0.2/driver/ivtv-fb.c:59: >>>> /root/ivtv/ivtv-1.0.2/driver/ivtv-driver.h:755: error: array type >>>> has incomplete element type >>>> make[3]: *** [/root/ivtv/ivtv-1.0.2/driver/ivtv-fb.o] Error 1 >>>> make[2]: *** [_module_/root/ivtv/ivtv-1.0.2/driver] Error 2 >>>> make[2]: Leaving directory >>>> `/usr/src/kernels/2.6.20-1.2925.fc6-i686' make[1]: *** [all] Error >>>> 2 >>>> make[1]: Leaving directory `/root/ivtv/ivtv-1.0.2/driver' >>>> make: *** [all] Error 2 >>>> >>>> and of course it dies... >>>> >>>> looking at line 755 I see: >>>> >>>> struct v4l2_enc_idx_entry pgm_info[IVTV_MAX_PGM_INDEX]; >>>> >>>> >>>> Thats the extent of my programing ability... cut-n-paste... >>>> >>>> :) >>>> >>>> Thanks, >>>> >>>> Larry >>>> >>>> Hans Verkuil wrote: >>>>> On Sunday 26 August 2007 01:53:16 Hans Verkuil wrote: >>>>>> On Sunday 26 August 2007 01:41:46 Larry wrote: >>>>>>> Running myth 20.2 >>>>>>> ivtv_xdriver-0.10.7-8_r3843.fc6.at >>>>>>> perl-Video-ivtv-0.13-8.fc6.at >>>>>>> ivtv-kmdl-2.6.22.1-32.fc6-1.0.1-133.fc6 >>>>>>> ivtv-kmdl-2.6.22.2-42.fc6-1.0.1-133.fc6 >>>>>>> ivtv-1.0.1-133.fc6 >>>>>>> ivtv-kmdl-2.6.20-1.2925.fc6-0.10.1-126.fc6.at >>>>>>> ivtv-firmware-20070217-13.at >>>>>>> ivtv-kmdl-2.6.19-1.2911.fc6-0.10.1-126.fc6.a >>>>>>> >>>>>>> Kernel 2.6.22.2-42.fc6 >>>>>>> >>>>>>> The "fix" was posted here: >>>>>>> >>>>>>> http://www.gossamer-threads.com/lists/ivtv/users/36500 >>>>>>> >>>>>>> I'm running into the same error that the user did, however I >>>>>>> must admit the user was able to make more out of the suggestion >>>>>>> than I was. I have built my box primarily from Axel Thimms >>>>>>> repository and have avoided as best is possible any compile >>>>>>> from source action to minimize issues. >>>>>>> >>>>>>> How would I go about building the ivtv from the respository? >>>>>>> Is it a simple ./configure;make and make install? Am I doing >>>>>>> the IVTV or IVTV-FB? >>>>>>> >>>>>>> I have read the readme, and already had the osd_compat=1 >>>>>>> running... >>>>>>> >>>>>>> Any quick tips you can provide would be appreciated! >>>>>> Get the latest 1.0 branch here: >>>>>> >>>>>> http://ivtvdriver.org/viewcvs/ivtv/branches/1.0.tar.gz?view=tar >>>>>> >>>>>> Unpack, run 'make' and 'make install' (as root), and that's it. >>>>>> It installs a new ivtv-fb, this time using the correct >>>>>> ivtv-driver.h header. >>>>>> >>>>>> Or wait a bit longer since I'll make a 1.0.2 release tomorrow. >>>>>> To be honest, I forgot all about it that this fix was still >>>>>> pending in the branch. I really need to release it. >>>>> OK, I made the new release. It's not much work and makes life >>>>> easier for you. Just get it from here: >>>>> >>>>> http://dl.ivtvdriver.org/ivtv/archive/1.0.x/ivtv-1.0.2.tar.gz >>>>> >>>>> Regards, >>>>> >>>>> Hans >>>>> >>>>> _______________________________________________ >>>>> ivtv-users mailing list >>>>> [email protected] >>>>> http://ivtvdriver.org/mailman/listinfo/ivtv-users >>> _______________________________________________ >>> ivtv-users mailing list >>> [email protected] >>> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
